Cut Sheet

Wiring Diagram
3
4
1
2
18–30 V DC
IO-Link
Communication
Not used
Key
1 = Brown
2 = White
3 = Blue
4 = Black
IO-Link
®
IO-Link
®
is a point-to-point communication link between a master device and a sensor and/or light. It can be used to automatically
parameterize sensors or lights and to transmit process data. For the latest IO-Link protocol and
specifications, please visit www.io-
link.com.
For the latest IODD files, please refer to the Banner Engineering Corp website at: www.bannerengineering.com.
IO-Link Process Data In (Device to Master)
Use process data to read the device output state. When the device is in Four State Full Logic mode, use process data to read the
device logic state in addition to the output state.
Name
Description
Output State Output state follows touch button input (Touch Models Only)
Device State Current state (State 1, State 2, State 3, State 4). Only available with Operation Mode set to Four State Full Logic or
Multicolor
IO-Link Process Data Out (Master to Device)
Use process data out to define device states. Use parameter data to define device modes, states, and custom colors.
Advanced Mode
Use process data to control color, intensity,
flash, and other animation types. Process data is also used to control the sequence
value dynamically. Use parameter data to create custom colors, intensity, speeds, and to define output and touch settings.
Four State Full Logic Mode (Touch Models Only)
Use process data to define the Job Input state and to read the touch button state and device state (State 1, State 2, State 3,
State 4). See below for more information about how to achieve legacy logic types (C, D, E, and H). Use parameter data to
change color, intensity, flash, speed, select animation type, and define output settings.
Multicolor Mode
Use process data to activate the defined device state. Use parameter data to define output settings, control delays, color,
intensity, flash, and other animation types for State 1, State 2, State 3, and State 4.
Name
Description
Animation Type
Off Indicator is off
Steady Color 1 is solid on at defined intensity
Flash Color 1 flashes at defined speed, color intensity, and pattern
Two Color Flash Color 1 and Color 2 flash alternately at defined speed, color intensities, and pattern
50/50 Color 1 is displayed on 50% of the indicator and Color 2 is displayed on the other 50% of the indicator at the defined
color intensities
50/50 Rotate Color 1 is displayed on 50% of the indicator and Color 2 is displayed on the other 50% of the indicator while rotating at
the defined speed, color intensities, and rotational direction
Chase Color 1 is displayed as a single spot against the background of Color 2 while rotating at the defined speed, color
intensities, and rotational direction
Intensity Sweep Color 1 repeatedly increases and decreases intensity between 0% to 100% at defined speed and color intensity
Color Sweep Color 1 and Color 2 transition alternately at defined speed and color intensities
K30 Pro Devices with IO-Link
2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 215851 Rev. C