Cut Sheet

Name Description
Sequence Color 1 increments against the background of Color 2 at defined Dynamic or Static Sequence Value (Advanced mode and
other modes respectively)
Wave Color 2 increases in intensity on the background of Color 1 from one side of the device to the other at the defined speed
Animation Direction Defines the direction of rotation for the 50/50 rotate, chase, and sequence animations (CW or CCW)
Animation Pattern Defines the flash pattern for flash and two color flash animations (normal, strobe, three pulse, SOS, or random)
Animation Speed Defines the animation speed (slow, medium, fast, or custom)
Dynamic/Static Sequence Value Defines the span of Color 1 in the Sequence animation [0-255]. 0 means no portion of the animation will be Color 1, and it
increases in a circular manner to 255 which indicates the full circumference will be Color 1. In Advanced Mode, this is in
process data and is called Dynamic Sequence Value. In the other modes, this is in parameter data and is called Static
Sequence Value.
Sequence Shift Shifts the beginning of the sequence animation to the specified LED (LED1 at 12 o'clock continuing in the direction
indicated by the Animation Direction parameter)
Color 1 Defines Color 1 of defined animation
Color 1 Intensity Defines the intensity of Color 1 in the animation (high, medium, low, off, or custom)
Color 2 Defines Color 2 of defined animation
Color 2 Intensity Defines the intensity of Color 2 in the animation (high, medium, low, off, or custom)
Four State Full Logic Mode State Descriptions
Use process data job input and the touch button input to dictate which one of these states the device should be in. Use
parameter data to define the state characteristics.
State 1: Process Data job input off and touch button inactive
State 2: Process Data job input on and touch button inactive
State 3: Process Data job input off and touch button active
State 4: Process Data job input on and touch button active
Four State Full Logic
Not Actuated Actuated
No Input State 1 State 3
Job Input State 2 State 4
Legacy Logic Definitions (Four State Full Logic)
C Logic State 1 is Off. State 2 is Color 1/Job Input. State 3 is Color 2/Acknowledge. State 4
is defined the same as State 3
D Logic State 1 is Off. State 2 is Color 1/Job Input. State 3 is Off. State 4 is defined the
same as State 2
E Logic State 1 is Off. State 2 is Color 1/Job Input. State 3 is Color 2/Mispick. State 4 is
defined the same as State 2
H Logic State 1 is power, defined as Color 1. State 2 is defined the same as State 1. State 3
is Color 2/Sense. State 4 is defined the same as State 3
LED Control Mode
Use process data to define the color and intensity of each individual LED. Use parameter data to define customer colors and
intensities. LED1 is oriented at the 12 o'clock position continuing clockwise through LED4 near 11 o'clock position.
Name
Description
LED 1 Color...LED 4 Color Defines the color of the designated LED.
LED 1 Intensity...LED 4 Intensity Defines the intensity of the designated LED [Values: 0-10]
Demo Mode
Cycles through color spectrum, 50/50 rotate, intensity sweep, and sequence mode. Touch button speeds cycle rate up or
down (can be either Momentary or Latching). Touch button initiates state showing individually colored LEDs. When set to demo
mode, the device will cycle through the
defined sequence when power is applied regardless of its connection to an IO-Link
master.
Touch Settings (Touch Models Only)
Use Parameter Data to define the following settings.
Setting
Description
Touch Sensitivity Defines the sensitivity of the touch button as either Standard, High or Low. Low sensitivity resists false activation. High
sensitivity can be used for improved touch response (Touch models only)
K30 Pro Devices with IO-Link
P/N 215851 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 3