Cut Sheet

2. Assemble the brackets and hardware as shown in the appropriate figure.
Figure 2. Adapter bracket-to-stand mounting, shown ready for mounting of
SSM series mirror Figure 3. MSM Series mirror to stand mounting
Stand Pole
Bracket
(2 supplied with sensor)
2x M5 Screw
(supplied with sensor)
M4 Screw and "T" Nut
(8 supplied with stand; use as needed)
EZ-SCREEN 14/30 (or standard)
(emitter/receiver)
Figure 4. EZ-SCREEN 14/30 to stand mounting (standard)
M4 Screw and “T” nut
Stand Pole
Bracket
LP Light Screen
Figure 5. EZ-SCREEN LP to stand mounting
M4 Screw and “T” nut
Stand Pole
Bracket
M4 Screw
LS Light Screen
Figure 6. EZ-SCREEN LS sensor to stand mounting
M4 Screw and “T” nut
Stand Pole
Adapter Bracket
M4 Screw
SGS Bracket
SGS Grid Light Screen
Figure 7. SGS Grid to stand mounting, using the SGS bracket and the EZA-
MBK-2 brackets
MSA Series Stand
P/N 43687 Rev. D www.bannerengineering.com - Tel: + 1 888 373 6767 3