Cut Sheet

ManualsBrandsBanner Engineering ManualsControl & AutomationMirror/Sensor Stand, 66" Tall

3. Loosely mount the bracket assemblies to the pole using the M4 screws and “T” nuts supplied with the stand.

Note that all ﬁgures show the bracket assembly pointed out (away from the sensor or mirror). One or both of the bracket

assemblies may be reversed to point in, if necessary. However, access to the mounting screws becomes less convenient

and mirror rotation is limited when a bracket assembly is pointed in.

4. Mount the sensor or mirror to its brackets using the screws supplied with the sensor or mirror. Temporarily tighten those

screws.

5. Slide the sensor or mirror into position along the length of the pole and tighten the M4 screws into their “T” nuts to lock the

sensor or mirror into position.

This step requires accuracy. If no mirrors are involved in the sensing path, then any feature of the emitter can be matched

in vertical position with the same feature on the receiver. However, if one or more mirrors is used, the center of each mirror

must match the vertical position of the center of the

deﬁned area of the sensors. The upper and lower limits of the deﬁned

area are dimensioned in the light screen instruction manual.

6. Loosen the bracket screws to allow the sensor or mirror to rotate for alignment. See the light screen instruction manual for

alignment information.

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not

cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO

BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES

RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,

STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the

product is

identiﬁed as not intended for such purposes will void the product warranty. Any modiﬁcations to this product without prior express approval by Banner Engineering Corp will

void the product warranties. All

speciﬁcations published in this document are subject to change; Banner reserves the right to modify product speciﬁcations or update documentation at

any time. Speciﬁcations and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:

www.bannerengineering.com

For patent information, see

www.bannerengineering.com/patents

MSA Series Stand