Cut Sheet

ManualsBrandsBanner Engineering ManualsBackground Rejection SensorsSelf-Contained Adjustable-Field Sensor

Datasheet

Long-Range Self-Contained Adjustable-Field Laser Sensors

• Long-range

adjustable-eld background suppression sensor detects objects within a

dened sensing eld, and ignores objects located beyond the sensing eld cuto

• Powerful visible red laser sensing beam, class 1 and class 2 models available

•

Two-turn, logarithmic cuto point adjustment for easy seng of

cuto point at long

range; rotang pointer indicates relave cuto point seng

• Easy push-buon or remote programming of light/dark operate and output ming;

connuous status indicators verify all sengs at a glance

•

Output ON and/or OFF delays adjustable from 8 milliseconds to 16 seconds

• Tough ABS/polycarbonate blend housing is rated IEC IP67; NEMA 6

• Models available for 10 to 30 V dc operaon or universal voltage (12 to 250 V dc or 24

to 250 V ac, 50/60 Hz)

WARNING: Not To Be Used for Personnel Protecon

Never use this device as a sensing device for personnel

protecon. Doing so could lead to serious injury or

death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel

safety applicaons. A sensor failure or malfuncon can cause either an energized or de-energized sensor output

condion.

Models

Class 1 Laser

Models Cuto Point Cable Supply Voltage Output Type

Q60BB6LAF1400

Adjustable:

200 mm to 1400 mm (8 in to

55 in)

5-wire 2 m (6.5 )

10 V dc to 30 V dc Bipolar NPN/PNP

Q60BB6LAF1400Q 5-pin Euro-style QD

Q60BB6LAF1400QP

5-pin Euro-style QD 150 mm

(6 in)

Q60VR3LAF1400 5-wire 2 m (6.5 )

Universal Voltage

12 V dc to 250 V dc

24 V ac to 250 V ac

E/M Relay (SPDT), normally

closed and normally open

contacts

Q60VR3LAF1400Q1 4-pin Micro-style QD

E/M Relay (SPST), normally

open contact

Class 2 Laser

Models Cuto Point Cable

Supply Voltage Output Type

Q60BB6LAF2000

Adjustable:

200 mm to 2000 mm (8 in to

80 in)

5-wire 2 m (6.5 )

10 V dc to 30 V dc Bipolar NPN/PNP

Q60BB6LAF2000Q 5-pin Euro-style QD

Q60BB6LAF2000QP

5-pin Euro-style QD 150

mm (6 in)

Q60VR3LAF2000 5-wire 2 m (6.5 )

Universal Voltage

12 V dc to 250 V dc

24 V ac to 250 V ac

E/M Relay (SPDT), normally

closed and normally open

contacts

Q60VR3LAF2000Q1 4-pin Micro-style QD

E/M Relay (SPST), normally

open contact

To order the 9 m (30 ) PVC cable model, add the sux "W/30" to the cabled model number. For example, Q60BB6LAF1400 W/30. Models

with a quick disconnect require a mang cordset.

Q60LAF Series Laser Adjustable-Field Sensors

Original Document

114348 Rev. A

10 February 2017

114348

Summary of content (12 pages)

PAGE 1
Q60LAF Series Laser Adjustable-Field Sensors Datasheet Long-Range Self-Contained Adjustable-Field Laser Sensors • • • • • • • Long-range adjustable-field background suppression sensor detects objects within a defined sensing field, and ignores objects located beyond the sensing field cutoff Powerful visible red laser sensing beam, class 1 and class 2 models available Two-turn, logarithmic cutoff point adjustment for easy setting of cutoff point at long range; rotating pointer indicates relative cutoff poi
PAGE 2
Q60LAF Series Laser Adjustable-Field Sensors Overview The Q60LAF sensor is a full-featured adjustable-field sensor. These adjustable-field sensors are able to detect objects of relatively low reflectivity, while ignoring other objects in the background (beyond the cutoff point). The cutoff distance is mechanically adjustable, using the 2-turn adjustment screw on the top of the sensor. A rotating pointer indicates the relative cutoff position. The indicator moves clockwise to show increasing distance.
PAGE 3
Q60LAF Series Laser Adjustable-Field Sensors Cutoff Distance Receiver Elements Object B or Background Object A Near Detector R1 Lenses Receiver Elements Far Detector R2 Emitter E Sensing Axis Sensing Range Figure 1. Adjustable field sensing concept Figure 2.
PAGE 4
Q60LAF Series Laser Adjustable-Field Sensors Target Background Increas ing Dis To maximize contrast, position the lightest possible background to be used, at the closest position it will come to the sensor during use. Using a small screwdriver in the adjustment screw, adjust the cutoff distance until the threshold is reached and the green Light Sensed indicator changes state. If the indicator never turns ON, the background is beyond the maximum sensing cutoff and will be ignored.
PAGE 5
Q60LAF Series Laser Adjustable-Field Sensors DO LO SIG Cutoff Distance ON DELAY DELAY RANGE E, R1, R2 OFF R1 R2 E Sensing Field Sensing Field A reflective background object in this position or moving across the sensor face in this axis and direction may cause a false sensor response. A reflective background object in this position or moving across the sensor face in this axis is ignored. Figure 7. Object Beyond Cutoff - Problem Figure 8.
PAGE 6
Q60LAF Series Laser Adjustable-Field Sensors Configuring a Sensor Set the Output Delay The output of the Q60LAF sensor may be delayed between 0.008 and Major increments, displayed by a single full-intensity LED, are 16 seconds, in any of 72 increments. Delay is indicated on the 5shown: segment light bar using single LED segments or combinations of them, Step # Delay Time LED Status in varying stages of intensity. DO DO DO DO DO DO 16 seconds LO 72 SIG 4.0 seconds LO 56 SIG 1.
PAGE 7
Q60LAF Series Laser Adjustable-Field Sensors Increase the OFF Delay—4-second time-out Enter OFF Delay Setup Enable Delay Increment Single-Click Push Button ON DELAY – + >800 ms Rapid Decrement Press and Hold Single-Click ON – + DELAY DELAY T >800 ms OFF ON DELAY – + T T T >800 ms DELAY Step Decrement DELAY ON T T T >800 ms Press and Hold OFF T >800 ms OFF DELAY + – DELAY OFF Remote Input N/A ON Single-Click Push Button DELAY Enable Delay Decrement – Decrease the
PAGE 8
Q60LAF Series Laser Adjustable-Field Sensors Laser Description and Safety Information CAUTION: Do Not Disassemble for Repair This device contains no user-serviceable components. Do not attempt to disassemble for repair. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. A defective unit must be returned to the manufacturer. Aperture Ø 3.76 mm (0.148") 16.76 mm (0.66") 12.5 mm (0.49") Figure 12.
PAGE 9
Q60LAF Series Laser Adjustable-Field Sensors Specifications Supply Voltage and Current Q60BB6LAF models: 10 to 30 V dc (10% maximum ripple) at less than 50 mA exclusive of load Q60VR3LAF Universal models: 12 to 250 V dc or 24 to 250 V ac, 50/60 Hz Input power: 1.
PAGE 10
Q60LAF Series Laser Adjustable-Field Sensors Dimensions 15.2 mm (0.60") 4.0 mm (0.16") 4.9 mm (0.19") – DELAY OFF LO SIG + ON DO RANGE 25.0 mm (0.98") DELAY 60.0 mm (2.36") 52.0 mm (2.05") 4.0 mm (0.16") 2x ø4.2 mm (0.17") 14.0 mm (0.55") Q60BB6AFV200 75.0 mm (2.95") 52.0 mm (2.05") bn 67.0 mm (2.64") bu wh bk Q60BB6AFV200Q bn + 10-30V dc – + 10-30V dc – bu wh Load Load bk Load gy Load gy Remote Teach M3 hardware is included Remote Teach 17.0 mm (0.67") 77.6 mm (3.
PAGE 11
Q60LAF Series Laser Adjustable-Field Sensors Accessories Cordsets 4-Pin Micro-Style Cordsets Model Length MQAC-406 1.83 m (6 ft) MQAC-415 4.57 m (15 ft) Style Dimensions Pinout (Female) 42 Typ. Straight MQAC-430 1/2-20 UNF-28 ø 14.5 9.14 m (30 ft) MQAC-406RA 1.83 m (6 ft) MQAC-415RA 4.57 m (15 ft) 2 32 Typ 9.14 m (30 ft) 4 1 1 = Red/Black 2 = Red/White 3 = Red 4 = Green 28 Typ Right-Angle MQAC-430RA 3 1/2-20 UNF-28 ø 14.
PAGE 12
Q60LAF Series Laser Adjustable-Field Sensors Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period.