Cut Sheet

ManualsBrandsBanner Engineering ManualsControl & AutomationLong Range Laser Sensor Receiver, 18M

Brackets

SMB30SC

• Swivel bracket with 30 mm

mounting hole for sensor

• Black reinforced

thermoplastic polyester

• Stainless steel mounting and

swivel locking hardware

included

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

SMBQS30L

• Right-angle bracket for cable

sensor models

• Clearance for M4 (#8)

hardware

• ± 12° tilt adjustment

• 14-ga. stainless steel

Hole center spacing: A to B=35.0

Hole size: A=ø 4.3, B=ø 4.25x16.3

SMBQS30LT

• Tall right-angle bracket for

QD models

• ± 8° tilt adjustment

• 14-ga. stainless steel

Hole center spacing: A to B=35.0

Hole size: A=ø 4.3, B=ø 4.25x16.3

SMBQS30Y

• Heavy-duty die-cast bracket

• M18 vertical mount option

• ± 8° tilt adjustment with

cabled units

• Includes nuts and lock

washer

Hole size: A=ø 15.3

SMB30MM

• 12-ga. stainless steel bracket

with curved mounting slots

for versatile orientation

• Clearance for M6 (¼ in)

hardware

• Mounting hole for 30 mm

sensor

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

SMB30A

• Right-angle bracket with

curved slot for versatile

orientation

• Clearance for M6 (¼ in)

hardware

• Mounting hole for 30 mm

sensor

• 12-ga. stainless steel

Hole center spacing: A to B=40

Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5

All measurements are listed in millimeters, unless noted otherwise.

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.

will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty

period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE

OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE

LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER

ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product

previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection

applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval

by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product

specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most

recent version of any documentation, refer to: www.bannerengineering.com.

WORLD-BEAM QS30 LLP and LLPC