Instruction Manual
Table Of Contents
- Contents
- 1 The Sure Cross® Wireless Network
- 2 Features
- 3 Setting Up Your Wireless Network
- 3.1 Mixing Performance and Non-Performance (150 mW) Radios in the Same Network
- 3.2 Apply Power to the Gateway or Node
- 3.3 Bind Radios to Form Networks
- 3.4 LED Behavior for the Gateways
- 3.5 LED Behavior for the Nodes
- 3.6 Conducting a Site Survey (Gateway and Nodes)
- 4 Installing Your Sure Cross® Radios
- 5 Advanced Setup Options
- 5.1 DX80 Menu Structure
- 5.2 Web-based Configuration for the GatewayPro on DX83
- 5.3 Binding Mode: What does it do?
- 5.4 Setting the Network ID in Extended Addressing Mode
- 5.5 Manually Assign a Binding Code to a Gateway
- 5.6 Manually Assign a Binding Code to a Node
- 5.7 Setting the Maximum System Devices
- 5.8 Storage and Sleep Modes
- 5.9 Modbus Holding Registers
- 5.10 Modbus Communication Parameters
- 5.11 Default Output Conditions
- 5.12 Defining the Units
- 6 Product Support and Maintenance
- Index
2.6.3 DX83 Ethernet Bridge
65.0
[2.56’’]
7.9
[0.31’’]
80.3
[3.16’’]
65.0
[2.56’’]
7.65
[0.30’’]
80.8
[3.18’’]
136
[5.35’’]
60.0
[2.36’’]
14.67
[0.578’’]
2.6.4 DX80...E Housings
6 mm
[0.24”]
3.2 mm
[0.13”]
167.4 mm
[6.59”]
75.3 mm
[2.96”]
2X 12-14 NPSM
20.1 mm
[0.79”]
87.6 mm
[3.45”]
13.7 mm
[0.54”]
36.2 mm
[1.42”]
148.1 mm
[5.83”]
55.9 mm
[2.20”]
2X Dia 8.3 mm
[0.33”]
Figure 2. DX80...E Housing
Sure Cross
®
Performance DX80 Wireless I/O Networks
12 www.bannerengineering.com - Tel: + 1 888 373 6767