Instruction Manual
Table Of Contents
- Contents
- 1 The Sure Cross® Wireless Network
- 2 Features
- 3 Setting Up Your Wireless Network
- 3.1 Mixing Performance and Non-Performance (150 mW) Radios in the Same Network
- 3.2 Apply Power to the Gateway or Node
- 3.3 Bind Radios to Form Networks
- 3.4 LED Behavior for the Gateways
- 3.5 LED Behavior for the Nodes
- 3.6 Conducting a Site Survey (Gateway and Nodes)
- 4 Installing Your Sure Cross® Radios
- 5 Advanced Setup Options
- 5.1 DX80 Menu Structure
- 5.2 Web-based Configuration for the GatewayPro on DX83
- 5.3 Binding Mode: What does it do?
- 5.4 Setting the Network ID in Extended Addressing Mode
- 5.5 Manually Assign a Binding Code to a Gateway
- 5.6 Manually Assign a Binding Code to a Node
- 5.7 Setting the Maximum System Devices
- 5.8 Storage and Sleep Modes
- 5.9 Modbus Holding Registers
- 5.10 Modbus Communication Parameters
- 5.11 Default Output Conditions
- 5.12 Defining the Units
- 6 Product Support and Maintenance
- Index
5.1.3 FCTRY (Factory) Menu
The FCTRY menu displays the version numbers of various components within the device, including the radio micro number,
the LCD number, the device’s serial number, the device’s model number, and the production date.
*
FCTRY
AUTO
DISPLAY
LOOP
(DEV)
GATEWY
(RADIO
MICRO)
V 00.0 A
(LCD
MICRO)
V 00.0 A
(DX80
S/N)
(0000)
(DX80
MODEL)
(0000-00)
(PROD
DATE)
(00-00)
Single-click
Button 1
Factory Info
*
FCTRY
AUTO
DISPLAY
LOOP
(DEV)
NOD XX
(RADIO
MICRO)
V 00.0 A
(DX80
S/N)
0x0000(2)
(LCD
MICRO)
0x0000(2)
(PROD
DATE)
(00-00)
Single-click
Button 1
(DX80
MODEL)
0x0000(2)
Factory #s
Gateway Node
If you call Banner Engineering for technical support, having
this information available may help diagnose your particular
problem.
Sure Cross
®
Performance DX80 Wireless I/O Networks
www.bannerengineering.com - Tel: + 1 888 373 6767 33