Cut Sheet

ManualsBrandsBanner Engineering ManualsControl & AutomationSafety Controller Expansion Module,4NO Safety Outputs, 2NC Auxiliary Outputs, for XS26-2

XS/SC26-2 Safety Controller

Quick Start Guide

Origianl Document

174869 Rev. D 5 January 2017

About this Guide

This guide is designed to help you create a sample conﬁ guration for the XS/SC26-2 Safety Controller using

the XS26-2 Expandable Safety Controller PC Interface. For complete information on mounting, device

installation and operation, commissioning checkout procedures, product speciﬁ cations, troubleshooting, and

glossary, please refer to the Safety Controller Instruction Manual (p/n 174868) and support documentation

for individual safety input and output devices. Use of this document assumes familiarity with pertinent safety

standards and practices as outlined in the Instruction Manual.

Product Overview

Summary of content (9 pages)

PAGE 1
XS/SC26-2 Safety Controller Quick Start Guide About this Guide This guide is designed to help you create a sample configuration for the XS/SC26-2 Safety Controller using the XS26-2 Expandable Safety Controller PC Interface.
PAGE 2
Designing a Sample Configuration The configuration process used in this guide provides basic understanding of the software features that are necessary to create a configuration for any application. The example configuration is based on a sample application which makes use of the following devices: an XS/SC26-2 Safety Controller, an E-stop button, a Safety Light Curtain, an Interlocked Gate Switch, and a Manual Reset.
PAGE 3
Software Installation System Requirements Operating system: Microsoft Windows XP Service Pack 3, Windows Vista, Windows 7, Windows 8 (except Windows RT), or Windows 10 System Type: 32-bit, 64-bit Hard drive space: 80 MB (plus up to 280 MB for Microsoft .NET 4.0, if not already installed) Memory (RAM): 512 MB minimum, 1 GB+ recommended Processor: 1 GHz minimum, 2 GHz+ recommended Screen Resolution: 1024x768 full color minimum, 1650x1050 full color recommended Third-party software: Microsoft .
PAGE 4
Designing a Configuration Open XS26-2 Expandable Safety Controller from the Desktop or the Start Menu. PC Interface Features 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 148770 Rev.
PAGE 5
1 Navigation Toolbar Starts a New Project or opens a Recent project and Sample Configurations Displays Password Manager Opens an existing project Reads data, such as Fault Log, Configuration, Network Settings, and Device Information, from the Safety Controller Saves (or Saves As) the project to the userdefined location Writes the data, such as Configuration and/or Network Settings, to the Safety Controller Prints a customizable Configuration Summary Makes the Live Mode view available Reverts up to
PAGE 6
Define the Project Settings Click Project Settings. Enter the information about the project: Configuration Name Name of the configuration; displayed on the controller (models with display); diﬀerent from file name. Project Project name is useful for distinguishing between various application areas. Author Person designing the configuration. Notes Supplemental information for this configuration or project. Project Date Date pertaining to the project. Add Equipment 1.
PAGE 7
3. Add Non-Safety Inputs by clicking under the Base Module: • Manual Reset Create Connections 4. Go to Functional View. Note: The Check List on the left lists any missing connections that need to be added before the configuration is valid. 5. Add the Function Blocks by clicking on one of the empty placeholders in the middle area: • Latch Reset Block P/N 148770 Rev. F www.bannerengineering.
PAGE 8
6. Add Logic Blocks by clicking on one of the empty placeholders in the middle area: • And 7. For this configuration, increase the number of Input Nodes to “3”. 8. Connect Optical Sensor, Gate Switch, and Latch Reset Block to one of the input nodes on the AND block. 9. Connect Emergency Stop and Manual Reset to the Latch Reset Block. 10. Connect the AND block to the Solid State Output (SO1).
PAGE 9
Save the Configuration 1. 2. 3. 4. Click Save. Select Save As. Navigate to the folder where you wish to save your configuration. Name the file (may be the same or diﬀerent from the Configuration name). 5. Click Save. Confirm the Configuration 1. Power the Safety Controller and connect it to the PC using the appropriate USB cable. 2. Click Send to Controller. 3. Enter the password (the default password is 1901). 4. Click Continue to enter the config-mode. 5.