User guide

D11 Series, Visible Green, Blue or White LED Light Source
Low cost self-contained sensors for use with plastic fiber optics
Printed in USA P/N 49424J9A
Features
• Visible green, blue or white LED light source for use in color mark sensing and other
low-contrast sensing applications
• Low cost, 10 to 30V dc self-contained sensors for use with all Banner plastic fiber
optics
• Compact 11 mm-wide housing designed for DIN rail mounting; can also be mounted
to any surface using the supplied mounting bracket
• Choice of NPN (sinking) or PNP (sourcing) complementary outputs - one normally
open and one normally closed; 150 mA output load rating
• Normally-closed output may be wired as a diagnostic alarm to alert personnel to
marginal sensing conditions
†
• Fast, 500 microsecond (0.5 millisecond) output response
• LED status indications for Power On, Output Overload, Fiber Alignment, and
Marginal Gain Conditions
• Choose models with integral 2 m (6.5') cable or Pico-style quick disconnect (QD)
connector; 9 m (30') cables are also available
†
U.S. Patent #5087838
D11 Series Models
Models Range Cable*
Supply
Voltage Output Type
Range Specifications
Visible Green 525 nm
D11SN6FPG
D11SN6FPGQ
Range varies
by sensing
mode
and fiber
optics used
2 m (6.5')
4-pin Pico QD
10-30V dc
Complementary
NPN (sinking)
D11SP6FPG
D11SP6FPGQ
2 m (6.5')
4-pin Pico QD
Complementary
PNP (sourcing)
Visible Blue 470 nm
D11SN6FPB
D11SN6FPBQ
Range varies
by sensing
mode
and fiber
optics used
2 m (6.5')
4-pin Pico QD
10-30V dc
Complementary
NPN (sinking)
D11SP6FPB
D11SP6FPBQ
2 m (6.5')
4-pin Pico QD
Complementary
PNP (sourcing)
Visible White 450 - 650 nm
D11SN6FPW
D11SN6FPWQ
Range varies
by sensing
mode
and fiber
optics used
2 m (6.5')
4-pin Pico QD
10-30V dc
Complementary
NPN (sinking)
D11SP6FPW
D11SP6FPWQ
2 m (6.5')
4-pin Pico QD
Complementary
PNP (sourcing)
Diffuse mode performance based on 90% reflectance white test card
See Sensing Beam
Information Below
1
10
100
1.0 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
0.1 mm
0.004 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
D11FPG,
D11FPB and
D11FPW Series
Opposed Mode
Plastic Fibers
PIT46U
Fibers
PIT66U
Fibers
PIT26U
Fibers
1
10
100
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
1.0 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
D11FPG, D11FPB and
D11FPW Series
Diffuse Mode
Plastic Fibers
PBT66U
Fibers
PBT46U
Fibers
*NOTE: 9 m (30') cables are available by adding suffix "W/30" to the model number of any cabled sensor (e.g., D11SN6FPB W/30). A model with
a QD connector requires an optional mating cable (see page 3).