Installation guide

Fiber Adapters
NOTE: If a thin fiber with less than 2.2 mm outer diameter is used, install the fiber adapter provided
with the fiber assembly to ensure a reliable fit in the fiber holder. Banner includes the adapters with all
fiber assemblies.
TO
FIBERS
TO
SENSOR
Fiber Outer Diameter (mm) Adapter Color
Ø 1.0 Black
Ø 1.3 Red
Ø 2.2 No adapter needed
When connecting coaxial-type fiber assemblies to the amplifier, install the solid core fiber to the LED emitting port, and the
multi-core fiber to the PD receiving port for most reliable detection.
TRANSMITTER
RECEIVER
Single-core fiber
Multi-core fiber
Wiring Diagrams
NPN Models PNP Models
Key
1 = Brown
2 = White
3 = Blue
4 = Black
Euro
2
3
4
1
Pico
4
3
1
2
For cable options, see http://
www.bannerengineering.com
DF-G1 Expert
™
Dual Display Fiber Amplifier
P/N 161275 Rev. C www.bannerengineering.com - tel: [phone]