Installation guide

Program Mode
Program (PRG) mode allows the
following settings to be
programmed in the
DF-G1:
Factory Default Settings:
Setting Factory
Default
Threshold 2026
TEACH
Selection
Two-Point
TEACH
Response
Speed
Standard -
500 µs
Offset Percent 10%
Auto
Thresholds
OFF
OFF Delay 0 (Disabled)
OFF One-Shot 0 (Disabled)
ON Delay 0 (Disabled)
ON One-Shot 0 (Disabled)
Display
Readout
Numeric, ECO
disabled,
Normal
Orientation
Gain Selection Auto Gain
DF-G1 Expert
Dual Display Fiber Amplifier
6 www.bannerengineering.com - tel: 763-544-3164 P/N 161275 Rev. C