Instruction manual

Method Action Result

SET Button

• Present sensing condition

•

Click the SET rocker button

Threshold Condition Accepted

Displays read "wInd SEt" then

alternate "PASS" with % Offset

;

Sensor returns to Adjust mode

Threshold Condition Not Accepted

Displays read "wInd SEt" then

alternate "FAIL" with minimum %

Offset

for sensing condition; Sensor

returns to Adjust mode

Remote Input

• Present sensing condition

•

Single-pulse the remote input

3. Return to RUN Mode

Method Action Result

SET Button Move Mode switch to Run Display: Red - Signal Level; Green -

Window Center (see Figure 8 on page

for instructions on how to display

upper and lower thresholds)

Remote Input No action required; sensor returns to

Run mode automatically

Figure 8. Upper and Lower Thresholds

6.4 Light SET

• Sets a threshold a programmable % offset below the presented condition

•

Changes output state on any condition darker than the threshold condition

• Threshold can be adjusted using "+" and "-" rocker button (Manual Adjust)

• Recommended for applications where only one condition is known, for example a stable light background with

varying darker targets

• See Program Mode on page 9 for programming the Offset Percent setting

See Troubleshooting on page

24 for more explanation of the % Offset displayed after the Window SET method

DF-G1 Expert

™

Dual Display Fiber Amplifier