User Manual

EZ-LIGHT
™
for EZ-SCREEN
®
DC-operated LED Indicators
Installation
Guide
Printed in USA 01/09 P/N 121901 rev. E
Models Construction Connector LED Function Inputs
M18RGX8PQ8
(See Note below*)
Nickel-plated brass housing, M18x1
thread; thermoplastic diffuser.
Fully encapsulated
IP67
8-pin
Euro-style
integral QD
connector
Red/Green
indication follows
OSSD output of
the EZ-SCREEN
receiver
PNP
(Sourcing)
T18RGX8PQ8
Thermoplastic polyester housing,
thermoplastic diffuser.
Fully encapsulated
IP67
T30RGX8PQ8
Thermoplastic polyester housing,
thermoplastic diffuser.
Fully encapsulated
IP67
K30LRGX8PQ8
22 mm threaded polycarbonate base,
translucent polycarbonate dome.
Fully encapsulated
IP67
K50LRGX8PQ8
30 mm threaded polycarbonate base,
translucent polycarbonate dome.
Fully encapsulated
IP67
K50FLRGX8PQ8
Polycarbonate base, translucent
polycarbonate dome.
Fully encapsulated IP67
K80LRGX8PQ8
ABS and polycarbonate base,
translucent polycarbonate dome
Electronics fully encapsulated
IP67
* Available in a kit that includes one M18 EZ-LIGHT, one SMB18A mounting bracket, and hardware for mounting to the side channel of an EZ-SCREEN housing (kit model number
EZA-M18RGX8PQ8).
Additional information on this product is immediately available online at www.bannerengineering.com/121901
For further assistance, contact a Banner Engineering Applications Engineer at [phone] or [phone].
Models