Manualshelf

Manual

ManualsBrandsBanner ManualsSensorsK50FL Multi-Function EZ-LIGHT
12345
DC-operated indicators with 4 colors and multiple flashing frequencies
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.com
Features
• Rugged, cost-effective and easy-to-install indicators available in K50, K50 Flat Pack,
or K80 housing style
• Displays 4 colors and multiple flashing frequencies: steady ON, flashing or alternating
• Illuminated dome provides easy-to-see operator guidance and indication of equipment
status
• Compact devices are completely self-contained — no controller needed
• Choose NPN or PNP input, depending on model
• Immune to ambient light, EMI, and RFI interference
• 18 to 30V dc operation
QPMA
E
U
R
O
-
S
T
Y
L
E
•
P
I
G
T
A
I
L
•
P
U
R
•
C
A
B
L
E
C
A
L
L
F
A
C
T
O
R
Y
Contact Factory for more information.
Models
Model Construction Connection* LED Function** Inputs
K50LGRYB4PQ
50 mm dome/ 30 mm mount pol-
ycarbonate
5-pin Euro QD
4 Color: Choose Green, Red,
Yellow or Blue ON, flashing or
alternative
PNP
K50LGRYB4NQ NPN
K50FLGRYB4PQ
50 mm polycarbonate dome/ pol-
ycarbonate base
PNP
K50FLGRYB4NQ NPN
K80LGRYB4PQ
50 mm dome/ Flat or DIN-mount
polycarbonate
PNP
K80LGRYB4NQ NPN
* Integral QD models only are listed.
K50L and K50FL Models:
• For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, K50LGRYB4PQP).
• For 2 m (6.5') cable, omit suffix Q from model number (example, K50LGRYB4P).
• A model with a QD requires a mating cable (see 5-Pin Euro-Style Cordsets on page 4)
K80L Models: For terminal-wired models, omit suffix Q from model number (example, K80LGRYB4P).
** Contact factory for other colors and color combinations.
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to seri-
ous injury or death. This product does NOT include the self-checking redundant circuitry necessary to
allow its use in personnel safety applications. A sensor failure or malfunction can cause either an ener-
gized or de-energized sensor output condition.
EZ-LIGHT™ Indicators — 4-Color, Multi-Function
P/N 137329 rev. C 3/8/2012
0 137329 5

Summary of content (5 pages)