User guide

ManualsBrandsBanner ManualsSensorsK50FL Multi-Function EZ-LIGHT

Datasheet

DC-operated LED indicators with solid ON or flashing capability and a Euro-style integral QD

. Choose from red, yellow, or

green ON, flashing, or rotating (depending on wiring).

Models Construction Inputs

M18GRY2PQ

Nickel-plated brass housing, M18x1 thread;

thermoplastic diffuser. Fully encapsulated; IP67.

PNP (Sourcing)

M18GRY2NQ NPN (Sinking)

T30GRY2PQ

Thermoplastic polyester housing, thermoplastic

diffuser. Fully encapsulated; IP67.

PNP (Sourcing)

T30GRY2NQ NPN (Sinking)

K50LGRY2PQ

30 mm threaded polycarbonate base, translucent

polycarbonate dome. Fully encapsulated; IP67.

PNP (Sourcing)

K50LGRY2NQ NPN (Sinking)

K50FLGRY2PQ

Polycarbonate base, translucent polycarbonate

dome. Fully encapsulated; IP67.

PNP (Sourcing)

K50FLGRY2NQ NPN (Sinking)

K80LGRY2PQ

ABS and polycarbonate base, translucent

polycarbonate dome. Electronics fully encapsulated;

IP67.

PNP (Sourcing)

K80LGRY2NQ NPN (Sinking)

Other Models: Standard integral QD models only are listed (mating cordset required). To order 2 m (6.5 ft) cable models,

omit suffix Q from model number (example, M18GRY2P). To order models with 150 mm (6 inch) PVC pigtail with 5-pin

Euro QD connector, replace suffix Q with QP (example, M18GRY2PQP).

Specifications

Supply Voltage and Current

M18 Models: 10 to 30 V dc at 40 mA max.

T30 Models: 10 to 30 V dc at 50 mA max.

K50L, K50FL and K80L Models: 18 to 30 V dc at 50 mA max.

Indicators

Entire translucent diffuser or dome provides indication.

LEDs are independently selected: Green, Red, Yellow, ON steady or

flashing.

For other colors/combinations, contact Factory for availability

Input Response Time

Indicator ON: 250 ms (max.)

Indicator OFF: 10 ms (max.)

Indicator Flash Rate

Single Color: 1 second flash rate (500 ms ON)

Three Color: 1.5 second rotation rate (500 ms per color)

Connections

K80L Models: 5-pin Euro-style integral QD (Q) standard. Terminal-

wired models available for use with bulk cable; compression fitting

optional. Contact Factory for cable information.

Other Models: 5-pin Euro-style integral QD (Q); 6" pigtail QD (QP), (do

not use center pin 5); or 5-wire, 2 m (6.5') integral cable

Operating Conditions

Temperature: –40 °C to 50 °C (–40 °F to 122 °F)

Environmental Rating

IEC IP67

K80L has encapsulated electronics only; other models fully

encapsulated

Pin 5 is not used; connects to 4-wire QD cordset. If a cordset other than those specified in this document is used, use a 5-pin mating cordset.

Contact Factory for other colors/color combinations, including: blue, white, orange.

K80L Models: Standard 5-pin Euro integral QD connector models only are listed (mating cordset required). For terminal-wired

model, omit suffix Q (example, K80LGRY2P).

EZ-LIGHT Indicators for 3-Color, 7-Function

Original Document

121902 Rev. I

20 February 2014

121902

Summary of content (4 pages)

PAGE 1
EZ-LIGHT Indicators for 3-Color, 7-Function Datasheet DC-operated LED indicators with solid ON or flashing capability and a Euro-style integral QD1. Choose from red, yellow, or green ON, flashing, or rotating (depending on wiring). 2 Models Construction M18GRY2PQ M18GRY2NQ PNP (Sourcing) Nickel-plated brass housing, M18x1 thread; thermoplastic diffuser. Fully encapsulated; IP67. T30GRY2PQ T30GRY2NQ PNP (Sourcing) 30 mm threaded polycarbonate base, translucent polycarbonate dome.
PAGE 2
EZ-LIGHT Indicators for 3-Color, 7-Function Dimensions M18 Models T30 Models K50L Models 50.0 mm (1.97") Ø 40.0 mm (1.57") Ø16.5 mm (0.65") 63.7 mm (2.51") M30 x 1.5 Thread 61 mm (2.4") 30 mm (1.2") M12 X 1 38 mm (1.50")* M30 x 1.5 (mounting nut included) Max. Torque 4.5 Nm (40 in-lbf) 20 mm (0.79") Internal Threads ½ - 14 NPSM Max. Torque 2.25 Nm (20 in-lbf) 45.0 mm (1.77") 11 mm (0.43") Ø 15 mm (0.59") M18 X 1 23 mm (0.9") M12 X 1 K50FL Models K80L Models 44.6 [1.76"] 80.8 mm (3.
PAGE 3
EZ-LIGHT Indicators for 3-Color, 7-Function Table 2: Only QD wiring is shown; cabled wiring is functionally identical. PNP Models NPN Models Pinout 2 1 3 4 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray G = Green R = Red Y = Yellow X = Not Used Z = Input Connections (see table above Accessories 4-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC-406 1.83 m (6 ft) MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) MQDC-415RA 4.
PAGE 4
EZ-LIGHT Indicators for 3-Color, 7-Function Brackets For use with T30 models or base-mount K50L models. Other available 30 mm diameter brackets are: 45 SMB30A • Right-angle bracket with curved slot for versatile orientation • Clearance for M6 (¼ in) hardware • Mounting hole for 30 mm sensor • 12-ga. stainless steel C 61 B A 69 Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.