Manual

L-GAGE Q50A Analog Output Sensor Specifications
L-GAGE Q50A Analog Output Sensor
page 6
Banner Engineering Corp. Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Q50A: 50 to 200 mm (2" to 7.9")Sensing Range
Linearity
Output Protection
Supply Voltage 15 to 30V dc (10% maximum ripple); 70 mA max. (exclusive of load)
Supply Protection Circuitry Protected against reverse polarity and transient overvoltages
Delay at Power-up 2 seconds
Sensing Beam Wave length Q50AV: 685 nm (typical) Q50A: 880 nm (typical)
Beam Size Q50AV: 20 mm dia. (max.) Q50A: 20 mm dia. (max.)
Output Configuration Depending on model
4-20 mA current sourcing models: 1 k max. load @ 24V dc. Max. load = [(V
cc
-4.5)/0.02]
Loss of signal or target outside of sensor range: 3.6 mA
0-10V voltage sourcing models: 15 mA max.
Loss of signal or target outside of sensor range: 0V
Protected against short circuit conditions
Temperature Drift
Output Response Time Analog Output Average Update -3 dB Frequency
Interval Rate Response
Fast: 4 ms 1 ms 112 Hz
Slow: 64 ms 4 ms 7 Hz
±1.5 mm
Resolution See Figure 3 for typical values
Target Distance: 100 mm
Slow Response: 0.5 mm max.
Fast Response: 2.0 mm max.
Color Sensitivity (typical) See Figure 4
Q50AV: 50 to 150 mm (2" to 5.9")
From 0° to 50°C: 0.08 mm/°C
From -10° to 55°C: 0.11 mm/°C
Remote and Speed Input
Impedance
15 k
Remote Teach Input To Teach: Connect gray wire to +5 to 30V dc
To Disable: Connect gray wire to 0 to +2V dc (or open connection)
Adjustments Response Speed:
Fast Speed: Connect black wire to +5 to 30V dc
Slow Speed: Connect black wire to 0 to +2V dc (or open connection)
Indicators Range LED Green — Target is within sensing range
Indicator Red — Target is outside sensing range
(green/red) OFF — Sensor Power OFF
Teach/Output Yellow — Target is within taught window limits
LED Indicator OFF — Target is outside taught window limits
(yellow/red) Red — Sensor is in TEACH mode
Minimum Taught Window
Model #
Ambient Light Immunity <10,000 Lux
Distance
Q50A
Q50AV
5 mm
5 mm
10 mm
10 mm
15 mm
15 mm
20 mm
20 mm
25 mm
25 mm
35 mm
50 mm
50 mm 75 mm
100 mm 125 mm 150 mm 175 mm 200 mm