Instruction Manual

ManualsBrandsBanner ManualsSensorsM-GAGE S18M Series Vehicle Detection Series

Power Supply for use with 12-30V dc Sensors

For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.com

• Simple DIN-rail mount

• Indicators for Power ON and Output Active

• Includes sensor TEACH push button

• Additional terminals provide in-situ data collection for some sensors

Overview

The SIM-525T is a passive DIN-rail-mountable module that allows additional status indicators to be located in the user’s control cabinet. It

also provides a Remote TEACH push button for interfacing to any Banner 5-wire Expert product.

It is designed to provide remote indication and Teach capability for Banner M-GAGE™ and T-GAGE® sensors, when their mounting

does not allow easy access to the sensor (as when mounted underground or sealed in pavement, for example).

The module also features two separate “tie points” to allow for a sensor signal capture when using the Banner DPB1 Programming Box

and sensor-specific monitor software. The tie points also can be used as a Teach input by the user’s PLC.

Specifications

Supply Voltage

12 to 30V dc

Output Rating

100 mA

Environmental Rating

IP 00

Agency Approvals

Due to the device's passive nature, no approvals are

planned

Dimensions

BU BN GY BK WH

WH BK GY BN BU

BU GY

36 mm

(1.4")

86 mm

(3.4")

Yellow

Output

LEDs

TEACH

Push

Button

Green

Power

LED

Push to reveal

wire chamber

43 mm

(1.7")

TEACH

PNP NPN

POWER

Model SIM-525T Sensor Interface Module

P/N 123240 Rev. A 5/23/2012

0 123240 0

Summary of content (3 pages)

PAGE 1
Model SIM-525T Sensor Interface Module Power Supply for use with 12-30V dc Sensors For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.
PAGE 2
Model SIM-525T Sensor Interface Module Typical Hookup M-GAGE shown WH BK GY BN BU BU Sensor Connections GY Optional functions; see reverse BU BN GY BK WH Optional functions – + 10-30V dc Additional Hookups Typical Interface - M-GAGE in Pavement with PCL I/O PNP I/O Typical Interface – With Banner Expert Sensor to provide Remote Teach Button* PLC or other DC/IO User-supplied PLC or controller and power supply 24V dc + – + WH GY BN BK GY BN BU BU PNP BK – PNP I/O WH To Syste
PAGE 3
Model SIM-525T Sensor Interface Module Advanced Hookup D1 D3 GREEN PWR Blu To User-Supplied Power Supply R2 33K D3 R1 33K D4 YELLOW NPN R3 33K D6 YELLOW PNP Blu Brn Brn P1 Gry Gry Blk Blk P2 Sensor Wht Wht Push Button (Normally Open) Blu To DPB1 or Remote Teach D5 P3 Gry Color Blu Brn Gry Blk Wht BLUE BROWN GRAY BLACK WHITE Function 0V DC COMMON +12V TO +30V DC TEACH PNP OUT NPN OUT Banner Engineering Corp Limited Warranty Banner Engineering Corp.