User Manual

MAXI-BEAM Sensor Heads
Sensing Mode Models
Range: 5 feet (1,5 m) in
HP and 2W modes
Beam: infrared, 880nm
Response:
HP, 2W modes: 10ms
HS mode: 1ms
SP mode: 0.3ms
Repeatability: HP, 2W=
3.3ms; HS = 0.3ms;
SP = 0.1ms
RSBD
DIFFUSE Mode
(short range)
Range: 30 inches (76cm)
in HP and 2W modes
Beam: infrared, 880nm
Response:
HP, 2W modes: 10ms
HS mode: 1ms
SP mode: 0.3ms
Repeatability: HP, 2W=
3.3ms; HS =0.3ms;
SP =0.1ms
RSBDSR
RSBC
Focus at 1.5 in. (38mm)
Beam: infrared, 940nm
Response:
HP, 2W modes: 10ms
HS mode: 1ms
SP mode: 0.3ms
Repeatability:
HP, 2W= 3.3ms;
HS = 0.3ms;
SP= 0.1ms
Powerful infrared beam reliably senses objects of low reectivity. Ideal for count-
ing the ow of radiused products at a xed distance from the sensor.
Focus at 1.5 in. (38mm);
performance equal in all
program modes.
Beam: visible red, 650nm.
Response:
HP, 2W, SP modes: 4ms
HS mode: 1ms
Repeatability:
HP, 2W, SP= 1.3ms;
HS = 0.3ms
RSBCV
CONVERGENT Mode
RSBFF models
Far limit cutoff at:
50mm (model RSBFF50) or
100mm (model RSBFF100)
Beam:
infrared, 880nm.
Response:
HP mode: 10ms
Repeatability:
HP mode: 3.3ms
1000
100
10
1
0.1 mm
1 mm
10 mm
100 mm
MAXI-BEAM Fixed-field
Sensor Heads
E
X
C
E
S
S

G
A
I
N
DISTANCE
100 mm
50 mm
5
(Range based on 90% reflectance
white test card)
Fixed-eld sensor heads have an emit-
ter element and two differently-aimed
receiver elements. This creates a
high-gain sensing eld able to detect
objects of low reectivity, and a sharp
far-limit sensing cutoff of 50mm (2
inches) or 100mm (4 inches) which
ignores backgrounds beyond cutoff.
These sensors are ideal for detecting a
part or surface that is only a fraction of
an inch in front of another surface.
RSBFFs may not be used with 2-wire
power blocks.
FIXED-FIELD Mode
Beam Pattern
Excess Gain
Powerful visible red beam with precise .06" diameter sensing spot. Useful in many high-contrast color registration applications.
3