Owner's manual

Mounting Track
RS8K
The RS8K is a kit of parts which
comprise the socket portion of
the RS8 assembly. It is used to
provide a socket for MICRO-AMP
modules that are installed onto
printed circuit boards. The RS8K
consists of a molded socket block
and 8 individual socket pins. A
nylon screw is included to affix
the socket block to the PC board.
The drill size for the pins is #50
(.070"; 1,8mm). Drill pattern
dimensions are included with the
RS8K.
The RS8 socket is the most
frequently used means of mount-
ing and wiring a MICRO-AMP
module. It consists of a socket
with two four-terminal connection
strips, all wired together onto a
PC board. The PC board assem-
bly slides into a 1 inch (25mm)
long PVC track which is used to
mount the entire assembly. A
hold-down screw keys the correct
polarity of the module.
Dimensions, TR-100 Mounting Track
PVC mounting track for MICRO-AMP components is available in 6 and 12 inch lengths for
systems which use multiple components. For example, a 6-inch length will accommodate one
MPS-15 power supply plus two additional RS8 sockets with modules.
Longer lengths of mounting track may be supplied on a quote basis.
TR100-1 1 inch (25mm) long (supplied with RS8 socket)
TR100-4 4 inch (100mm) long (supplied with MPS-15 series power supply)
TR100-6 6 inch (150mm) long
TR100-12 12 inch (300mm) long
MICRO-AMP
®
Accessories
WARNING MICRO-AMP
®
Systems do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applica-
tions. A sensor or module failure or malfunction can result in either an energized or a de-energized sensor output condition.
Never use this product as a sensing device for personnel protection. Its use as a safety device may create an unsafe condition which could lead to
serious injury or death.
Only MACHINE-GUARD and PERIMETER-GUARD Systems, and other systems so designated, are designed to meet OSHA and ANSI machine safety
standards for point-of-operation guarding devices. No other Banner sensors or controls are designed to meet these standards, and they must NOT be
used as sensing devices for personnel protection.
Banner Engineering Corp. 9714 10th Avenue No., Minneapolis, MN 55441 Telephone: [phone] www.bannerengineering.com
RS8
Sockets
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will
repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This
warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE US-
AGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE
TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STAT-
UTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previ-
ously manufactured by Banner Engineering Corp.
Track Model "A" Dimension Min. Number of Slots
TR100-1 1" (25 mm) 1
TR100-4 4" (100 mm) 2
TR100-6 6" (150 mm) 3
TR100-12 12" (300 mm) 8