User Manual

2.1.3 P4 Cable Connections
Note: The sensor power must be 24V dc ± 10% if a light source is powered by the sensor.
Monitor Cable (to Video Monitor, optional)Crossover Ethernet Cable (to PC Ethernet Port)*
BNC06 —2 m (6')STPX07 — 2.1 m (7')
BNC15 — 5 m (15')STPX25 — 7.6 m (25')
BNC30 — 9 m (30')or
Serial Cable (to PC serial Port)*Standard Ethernet Cable (to PC via Network Hub
or Switch
DB9P06 — 2 m (6')
STP07 — 2.1 m (7')
DB9P15 — 5 m (15')
11Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
P/N 000000
System Description7/2009