User Manual

The Decoder Mode determines which decode algorithm to employ and how imperfections in barcode images
are handled. Of the two options, Robust is preferred and is the default.
DescriptionDecoder Mode Option
When you select Robust, the sensor employs an
algorithm that performs routines to correct for
Robust
imperfections of the barcode image. This mode
typically has the higher read rate.
When you select Fast, the sensor employs an
algorithm that is "tailored" for speed. The
Fast
algorithm does NOT correct for barcode image
imperfections. The Fast setting has the best
results on high-contrast images that contain
high-quality DataMatrix barcodes. Fast should be
used only when demanded by the desired read
rates. If speed is not critical, select Robust for
better results.
Linear Only Options
Check Sum Verify (Code 39 and Interleaved 2 of 5)
Check the box to use a checksum to verify the integrity of a Code 39 or Code 2 of 5 Interleaved linear barcodes.
Relaxed Quietzone (Linear Only)
Check the box to provide a greater tolerance with respect to the quiet zone required before and after the
barcode.
Direction (Pharmacode Only)
From the drop-down list, select one of the following:
—Left To Right
—Right To Left
—Top To Bottom
—Bottom To Top
P/N 000000Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
110
7/2009PresencePLUS Software Tools