User Manual

Additional InformationDescriptionEnhanced
Character
Settings
These values determine the
maximum width and height
allowed for the boxing around
a character. Typically, these
values will be the width (and
height) of the largest valid
character. If a character is
larger than the Max Box
Width setting, for example,
the sensor will force the box
Max Box Width
Max Box Height
to be the Max Box Width
unless the Oversized
characters has Discard
selected, in which case, for
example, a 5 pixel character
will be ignored.
If a box reaches the Max Box
Width without finding a
natural character ending,
when Enable Adaptive Max
Box Width is checked, the
senor will adjust the right
edge of the box to find a most
likely endpoint for a
character.
Enable Adaptive
Max Box Width
Undersized
characters
• When Discard is selected,
the sensor will reject
proposed boxes that do not
meet the minimum
requirements (see Minimum
Box Width above).
• When Extend is selected,
the sensor will make the
character fit the box.
Oversized
characters
• When Discard is selected,
the sensor will reject
proposed boxes that do not
meet the maximum
requirements (see
Maximum Box Width above)
.
• When Split is selected, the
sensor will split the
character into multiple
characters.
131Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
P/N 000000
PresencePLUS Software Tools7/2009