User Manual

Output Filter
This field provides a means to make specific output selections in order to avoid unwanted output information.
Guidelines for Configuring the Communication Tool
There are four main steps in configuring the Communication tool:
1. Select the Vision tools and their results to export (in the Select field).
• When a tool is selected, the selected tool’s tab appears in the Configuration window.
• Click on the tab to select the data to be exported.
2. Select the communication connection(s) that will export the data (in the Connection field).
• If MULTIPLE is chosen from the drop-down list, then click Edit Selections to select more than
one port.
• Click View Settings to display the configuration of the connection.
• Data can be sent through 11 different communication connections: one connector for the serial
connection, and 10 sockets (1 to 10) through the Ethernet connector.
• The 10 Ethernet sockets are comprised of the Sensor IP address and port number. The table
below lists the default Ethernet socket addresses.
PortDefault IP AddressSocket
20,000192.168.0.11
20,001192.168.0.12
20,002192.168.0.13
20,003192.168.0.14
20,004192.168.0.15
20,005192.168.0.16
20,006192.168.0.17
165Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
P/N 000000
PresencePLUS Software Tools7/2009