User Manual

Match ResultsDescriptionOption
Ignore any alphabetic
characters
Ignore Alphabets
String Tool and the Remote Command Channel (RCC)
DescriptionSyntax
Sets the specified tool operand, if it is a
constant. Value should be a quoted string (see
set stringtool tool_name|tool_number operand_1|operand_2
Character Strings 6.2.2.6.1 Character Strings
on page 248).
Gets the value of the specified tool operand, if
it is a constant.
get stringtool tool_name|tool_number operand_1|operand_2
7.4.6 Test Tool
The Test tool uses Boolean logic to combine or convert tool results. Its data can be used to evaluate the
results of a single tool or multiple tools. The output of the Test tool can be used to input to another Test tool
or to generate a discrete output. Additionally, a discrete input can be tied to a Test tool.
The Test tool displays the result ranges it is using as judgement criteria. Typically, these ranges are automatically
set by Quick Teach or by teaching the inspection. Additionally, they can be manually set or modified either
before or after teaching or running the inspection, in which case Quick Teach will discard any manually entered
values. The Test tool also displays the results of the last image evaluated while setting up or running the
inspection.
P/N 000000Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
214
7/2009PresencePLUS Software Tools