User Manual

13
Saving Inspections
Inspection (.ins) files can be saved either to the sensor or to the PC. You need to save inspections to the sensor in
order to run them; however, you can also save a copy to the PC or your network as a backup.
An inspection (.ins) file contains the image parameters, inspection parameters and, optionally, the reference image:
• Image parameters are the programmed values used by the sensor to acquire the inspection image.
These values include gain, exposure time, and trigger setup.
• Inspection parameters include Location tools, Vision tools, and Analysis tools as well as their associated
parameters.
• The reference image is the image selected in the Setup screen.
Use the Save window to save an inspection to the Sensor or to save to an Inspections folder on the PC or network.
To display the Save dialog, click the Save button in the Menu toolbar.
279Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
P/N 000000