User Manual

CommentsOptional
Qualifiers
Required
Qualifiers
Support
Actions
Object or
Activity
Identifier
System
Object,
Component,
or Activity
Retrieve the
camera
exposure
NoneGETEXPOSUREExposure
Get the camera
exposure
NonePositive NumberSETEXPOSUREExposure
Enables frame
number as
NoneENABLESETFRAMETAGFrame Number
Tag
command
acceptance
indicator
Disables frame
number as
NoneDISABLESETFRAMETAGFrame Number
Tag
command
acceptance
indicator
Retrieve the
status of the
NoneNoneGETFRAMETAGFrame Number
Tag
frame tag
indicator
Coordinate tool
Commands
DescriptionSyntax
Returns the specified Coordinate tool output.
set coordtool tool_name|tool_number x\y|angle
Gets the value
get coordtool tool_name|tool_number x\y|angle
Math tool and the Remote Command Channel
Commands
DescriptionSyntax
Sets the specified tool operand, if it is a
constant. Value should be a floating number.
set mathtool tool_name|tool_number operand_1|operand_2
Gets the value of the specified tool operand, if
it is a constant.
get mathtool tool_name|tool_number operand_1|operand_2
String tool
Commands
P/N 000000Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: [phone]
60
7/2009System Setup Window Overview