Instruction Manual

®
LED..A62X62M Series Area Lights
LED Area Lights for use with
PresencePLUS
®
P4 sensors
Printed in USA 12/05 P/N 121780 rev. A
Features
• Low-cost, compact area lights for PresencePLUS
®
P4 sensor. See Banner’s Web
site (www.bannerengineering.com) for a complete lighting tutorial.
• Continuous or strobed operation is selectable via sensor software.
• Solid-state LED matrix
• Direct connection to PresencePLUS P4
• Two bracket options available
Light Source
LED, see Models table above for wave lengths
Illumination High-intensity area light
Supply Voltage and
Current
Voltage supplied by PresencePLUS P4 sensors, if operating at 24V dc (see sensor manual).
Infrared: 24V dc @ 150 mA max.
All other colors: 24V dc @ 200 mA max.
Connections
2 m (6.5') attached pigtail with 3-wire, 8 mm male Pico-style connector
Construction
Low-carbon steel with black zinc plating, acrylic window
Useful Life
10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30% after
10,000 hours and less than 50% (less than 40% for red and IR models) after 20,000 hours.
Operating Conditions
Temperature: 0° to +50°C (+32° to 122°F)
Relative humidity: 90% at 50°C (non-condensing) max.
Cleaning Instructions
Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use any
other chemicals for cleaning.
Specifications
Models Color
Ambient Light
Filter Kit
Polarizing
Filter Kit
LEDIA62X62M
Infrared, 940 nm FLTI (included with IR lights)
—
LEDRA62X62M
Visible Red, 630 nm FLTR (included with LEDAPFKS)
LEDAPFKS
LEDWA62X62M
White, All Visible
FLTB or FLTG
LEDBA62X62M
Blue, 464 to 475 nm
FLTB
LEDGA62X62M
Green, 520 to 540 nm
FLTG
Models
White, Green, or
Blue LED models
Red or Infrared
LED models