User Manual

Product Select #0Product Select #1Product Select #2Product Select #3Inspection Number
OFFONOFFON10
ONONOFFON11
OFFOFFONON12
ONOFFONON13
OFFONONON14
ONONONON15
* The only way to save an inspection to RamDisk (Inspection Number 0) is to use the Downloadable Inspection API.
Inspections stored in RamDisk are temporary; that is, if the sensor is restarted, or a product change occurs, the inspection
in RamDisk will be lost. If you try to access an inspection in RamDisk and there isn't one available, you will get an
system error 1000 (plus the Inspection Number attempted). For more information about the Downloadable Inspection
API, see the Inspection Download Users Guide.
Generalizing this BCD-type table; that is, writing an integer in binary and encoding the binary value into the correct
Product Select Inputs:
• the least significant bit is assigned to Product Select #0, or pin 19.
• the most significant bit is assigned to Product Select #3, or pin 16.
This will allow you to go to inspections 0-15. To get to higher inspection numbers, you have to start using up configurable
I/O (one of the options that you can select for the configurable I/O is Product Select).
Use the following guidelines to determine how many of the configurable I/O you will need to get to higher inspection
numbers:
• Using all four dedicated Product Select lines accomodates 2
4
inspections (16).
• By adding 2 of the configurable I/O, you will have a BCD table that has 2
6
entires (64 inspections).
• By adding all 6 of the configurable I/O as Product Select lines, you can access the full range of possible inspections
(technically 2
10
= 1024, but the real total is capped at an administrative limit of 999.)
The table below shows adding I/O #5 and I/O #6.
Product Select
#0
Product
Select #1
Product
Select #2
Product
Select #3
I/O #5 - Product
Select # 4
I/O #6 - Product
Select # 5
Inspection
Number
OFFOFFOFFOFFONOFF16
ONOFFOFFOFFONOFF17
OFFONOFFOFFONOFF18
ONONOFFOFFONOFF19
OFFOFFONOFFONOFF20
ONOFFONOFFONOFF21
OFFONONOFFONOFF22
ONONONOFFONOFF23
OFFOFFOFFONONOFF24
ONOFFOFFONONOFF25
OFFONOFFONONOFF26
ONONOFFONONOFF27
OFFOFFONONONOFF28
ONOFFONONONOFF29
Banner Engineering Corp.Minneapolis, MN USA354
2/2010Product Change