Instruction Manual

CAUTION: Do not overtighten the R45C's mounting screw during installation. Overtightening can affect the performance of
the R45C.
Wiring Diagrams
Male Female Pin Wire Color
1
4
3
2
2
3
4
1
1 Brown
2 White
3 Blue
4 Black
Male (IO-Link Master) Signal Description
Pin 1 18 V DC to 30 V DC
Pin 2 PFM/Banner-specific
Pin 3 Ground
Pin 4 IO-Link
Female (Analog 1) Signal Description
Pin 1 18 V DC to 30 V DC
Pin 2 Analog 1 In
Pin 3 Ground
Pin 4 Analog 1 Out
Female (Analog 2) Signal Description
Pin 1 18 V DC to 30 V DC
Pin 2 Analog 2 In
Pin 3 Ground
Pin 4 Analog 2 Out
IO-Link
®
IO-Link
®
is a point-to-point communication link between a master device and a sensor and/or light. It can be used to automatically parameterize
sensors or lights and to transmit process data. For the latest IO-Link protocol and specifications, please visit www.io-link.com.
For the latest IODD files, please refer to the Banner Engineering Corp website at: www.bannerengineering.com.
Configuration
The measured current value is available via Process Data as the measure value μA, and the voltage is available in mV.
For more information, see Banner P/N 228482 R45C-KUUII-UUIIQ IO-Link Data Reference Guide and Banner P/N 228483 R45C-KUUII-UUIIQ IO-
LINK IODD Files .
Specifications
Supply Voltage
18 V DC to 30 V DC at 50 mA maximum
Power Pass-Through Current
4 A maximum
Analog Input Impedance
Current version: Approximately 450 ohms
Voltage version: Approximately 14.3K ohms
Analog Output Load Resistance
Current version: 1 kilo-ohm maximum load resistance at 24 V DC
Maximum Load Resistance = [(Vcc - 4.5) ÷ 0.02 ohms]
Voltage version: 2.5 kilo-ohms minimum load resistance
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Leakage Current Immunity
400 µA
Resolution
14 bits
Connections
Integral male/female 4-pin M12 quick disconnect
Construction
Coupling Material: Nickel-plated brass
Connector Body: PVC translucent black
Environmental Rating
IP65, IP67, IP68
UL Type 1
Operating Conditions
Temperature: –40 °C to +60 °C (–40 °F to +140 °F)
90% at +60 °C maximum relative humidity (non-condensing)
Storage Temperature: –40 °C to +80 °C (–40 °F to +176 °F)
R45C IO-Link to Dual Analog Input-Output Converter
P/N 228480 Rev. A www.bannerengineering.com - Tel: + 1 888 373 6767 3