Installation Guide

Banner Engineering Corp.
9714 10th Avenue North • Minneapolis, MN 55441 • 1-888-373-6767 • www.bannerengineering.com
© 2023 Banner Engineering Corp. Minneapolis, MN USA PN 232194
Specifications
S4B Series Safety Light Curtains
Accessories
S4BA-MBK-16
Side mount brackets
with 15° of rotation (includes two
brackets). Maximum of 900 mm
of length between brackets.
Safety controllers ensure safe stop and start functions on equipment.
Visit our website for more information.
XS26 SC26 SC10
H
39.6 mm
38 mm
Supply Voltage
24 V DC ±15%
Resolution
30 mm
Output
Two 500 mA current sourcing (PNP) solid-state outputs (OSSD)
Operating Range
0.1 to 12 m
Selectable Scan Codes Two user-selectable scan codes to avoid crosstalk among
S4B pairs in close proximity
Construction Robust aluminum housing with recessed window and
die-cast end caps
Operating Conditions –20 to +55 °C
95% maximum relative humidity (non-condensing)
Short Circuit Protection All inputs and outputs are protected from short circuits to
+24 V DC or DC common
Electrical Safety
Class III (per IEC 61140)
Safety Rating Type 4 per IEC 61496-1, -2
Category 4 PL e per EN ISO13849-1
SIL3 per IEC 61508
Environmental Rating
IP65
Certifications
S4
Family
B
Feature Set
B = Basic
300 = 300 mm
450 = 450 mm
600 = 600 mm
750 = 750 mm
900 = 900 mm
1050 = 1050 mm
1200 = 1200 mm
1350 = 1350 mm
1500 = 1500 mm
1650 = 1650 mm
1800 = 1800 mm
S = Single Emitter or Receiver
(S4B Bracket(s) and S4B
Cordset(s) sold separately)
E = Emitter only
R = Receiver only
Defined Area
Termination
Device Type
900
S
E
30 = 30 mm
Resolution
30
——
Height (H)
300 mm
450 mm
600 mm
750 mm
900 mm
1050 mm
1200 mm
1350 mm
1500 mm
1650 mm
1800 mm
DES4E-51D
S4B removable
5-pin M12 QD pigtail
(includes one)
5-Pin M12
Double-Ended
DEE2R-5xxxD
0.3 m (1') to 30.5 m (100')
options available
5-Pin Male M12 to Dual
5-Pin Female M12 Splitter
CSB-M1251M1251
0.3 m (1') trunk/2 x
0.3 m (1') branches
5-Pin M12 with
Flying Leads
MQDC1-5xx
0.5 m (1.5') to 31 m (101.7')
options available
Safety Controllers
S4B Brackets
(required)
S4B Cordset
(required)
Cordsets
(optional)
Note: S4B brackets and S4B cordset are required for both emitter and receiver. Sold seprately (see below).