Owner manual

ManualsBrandsBanner ManualsEquipmentSureCross DX80 Wireless Networks

Printed in USA 11/08 P/N 137526 rev. A

SureCross™ DX80 FlexPower™ EZ-LIGHT™

Node with Integrated Battery

Node with an integrated battery for the EZ-LIGHT family

WARNING . . .

Not To Be Used for Personnel Protection

Never use these products for personnel protection. Doing so could lead to serious injury or death.

These products do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A

failure or malfunction can cause either an energized or de-energized output condition. Consult your current Banner Safety Products

catalog for safety products that meet OSHA, ANSI, and IEC standards for personnel protection.

Features

The SureCross™ DX80 is a radio frequency network system built around a Gateway and one

or more Nodes.

Wireless industrial I/O device speciﬁcally designed to work with Banner’s low-power •

EZ-LIGHT devices

Lithium primary battery integrated into the DX80 base •

Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple •

Access (TDMA) control architecture combine to ensure reliable data delivery within the

unlicensed Industrial, Scientiﬁc, and Medical (ISM) bands

Transceivers provide two-way communication between the Gateway and Node, including •

fully acknowledged data transmission

Lost RF links are detected and relevant outputs set to user-deﬁned conditions •

Internal or external antenna•

For additional information and a complete list of accessories, refer to Banner Engineering’s

website, www.bannerengineering.com/surecross.

Models

Model FlexPower™ Frequency Antenna I/O

DX80N9X1S1K3

3.6 to 5.5V dc low power

option

900 MHz ISM Band

External

Discrete Inputs: One Sinking or Sourcing

(Selectable)

Discrete Outputs: Three NMOS Sinking

DX80N9X1W1K3 Internal

DX80N2X1S1K3

2.4 GHz ISM Band

External

DX80N2X1W1K3 Internal

900 MHz, Internal battery model

Summary of content (8 pages)

PAGE 1
SureCross™ DX80 FlexPower™ EZ-LIGHT™ Node with Integrated Battery Node with an integrated battery for the EZ-LIGHT family Features The SureCross™ DX80 is a radio frequency network system built around a Gateway and one or more Nodes.
PAGE 2
SureCross™ DX80 FlexPower™ Node for EZ-LIGHT™ Hookup Diagrams Modbus Register Block * I/O Point* Gateway Modbus Holding Register Node Modbus Register 1 1 1 + (Node# • 16) 2 2 2 + (Node# • 16) 3 3 3 + (Node# • 16) 4 4 4 + (Node# • 16) 5 5 5 + (Node# • 16) 6 6 6 + (Node# • 16) 7 7 7 + (Node# • 16) Reserved 8 8 8 + (Node# • 16) Device Message 9 9 9 + (Node# • 16) Red Flashing Light 10 10 10 + (Node# • 16) Yellow Flashing Light 11 11 11 + (Node# • 16) Green Flashing Lig
PAGE 3
SureCross™ DX80 FlexPower™ Node for EZ-LIGHT™ Device Configuration Device Settings 6 7 8 Reserved OFF* OFF* OFF* 1/16 LED Duty Cycle OFF OFF ON 1/8 LED Duty Cycle OFF ON OFF 3/16 LED Duty Cycle OFF ON ON 1/4 LED Duty Cycle ON OFF OFF 3/8 LED Duty Cycle ON OFF ON 1/2 LED Duty Cycle ON ON OFF Continuous ON ON ON Rotary Switch Address Mode DX80 Extended Address Mode 1 2 3 Switches 4 5 OFF* ON Factory Default Configuration Enable DIP Switch Configuration Disable Externa
PAGE 4
SureCross™ DX80 FlexPower™ Node for EZ-LIGHT™ Specifications Many of the DX80 parameters are configurable. The values in the tables represent factory defaults unless otherwise noted. Radio * Range, with standard 2 dB antenna* 900 MHz: 300 meters (1000 ft) 2.4 GHz: 300 meters (1000 ft) Frequency 900 MHz: 902 to 928 MHz ISM band 2.4 GHz: 2.4 to 2.4835 GHz ISM Band Transmit Power 900 MHz: 21 dBm Conducted 2.
PAGE 5
SureCross™ DX80 FlexPower™ Node for EZ-LIGHT™ Specifications, continued Environmental Environmental Rating* IEC IP67; NEMA 6 Operating Temperature** −40 to +85° C (Electronics); −20 to +80° C (LCD) Operating Humidity 95% max. relative (non-condensing) Radiated Immunity 10 V/m, 80-2700 MHz (EN61000-6-2) Shock and Vibration IEC 68-2-6 and IEC 68-2-7 Shock: 30g, 11 millisecond half sine wave, 18 shocks Vibration: 0.
PAGE 6
SureCross™ DX80 FlexPower™ Node for EZ-LIGHT™ Notes 6 P/N 137526 rev. A Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.
PAGE 7
SureCross™ DX80 FlexPower™ Node for EZ-LIGHT™ Notes Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 P/N 137526 rev.
PAGE 8
SureCross™ DX80 FlexPower™ Node for EZ-LIGHT™ The manufacturer does not take responsibility for the violation of any warning listed in this document. CAUTION . . . Make no modifications to this product. Any modifications to this product not expressly approved by Banner Engineering could void the user’s authority to operate the product. Contact the Factory for more information.