Manual

ManualsBrandsBanner ManualsEquipmentSureCross DX80 Wireless Networks

SureCross™ DX80K Wireless Conﬁgured Kit

Discrete I/O between an M-GAGE™ Gateway and M-GAGE Node

Printed in USA 01/08 P/N 136442 rev. A

WARNING . . .

Not To Be Used for Personnel Protection

Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.

These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A

sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner

Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.

Features

The SureCross™ DX80 is a radio frequency network system built around a Gateway

and one or more Nodes. Configured kits are packaged in a box with the preset

Gateway, Node(s), accessories, and hardware to get up and running quickly.

Gateway input-to-output mapping provides an input on the Gateway mapped to the

baseline function on the M-GAGE™ Node

Kit is defined as one Gateway and one Node; up to five M-GAGE Nodes can be

expanded to the kit

M-GAGE input is mapped to the Gateway’s output

+10 to 30V dc powered Gateway and FlexPower™ M-GAGE Nodes

Proprietary radio optimized for effective power management

Frequency Hopping Spread Spectrum (FHSS) technology and Time Division

Multiple Access (TDMA) control architecture combine to ensure reliable data

delivery within the unlicensed Industrial, Scientific, and Medical (ISM) bands

Transceivers provide two-way communication between the Gateway and Node,

including fully acknowledged data transmission

Site Survey analyzes the network’s signal strength and reliability

For additional information and a complete list of accessories, including FCC approved

antennas, please refer to Banner Engineering’s website, www.bannerengineering.com/

surecross.

•

Model Power Frequency I/O

DX80K9M6VE1

+10 to 30V dc (Gateway)

3.6V dc Battery (Node)

900 MHz ISM Band

Discrete Inputs: Six Sourcing (Gateway), M-GAGE (Node)

Discrete Outputs: Six Sourcing (Gateway)

DX80K2M6VE1 2.4 GHz ISM Band

Models

Summary of content (4 pages)

PAGE 1
SureCross™ DX80K Wireless Configured Kit Discrete I/O between an M-GAGE™ Gateway and M-GAGE Node Features The SureCross™ DX80 is a radio frequency network system built around a Gateway and one or more Nodes. Configured kits are packaged in a box with the preset Gateway, Node(s), accessories, and hardware to get up and running quickly.
PAGE 2
SureCross™ DX80K Wireless Configured Kit Hookup Diagrams Extended I/O Terminal Block PWR PWR GND GND DO6 DI6 DO5 DI5 DO4 DI4 DO3 DI3 DO2 DI2 DO1 DI1 P2 G B - W + Configured input/output mapping I/O Point Terminal Block Label DX80 Gateway DX80 Node 1 DI1 Discrete IN 1 Baseline Command 14 Node 1 2 DI2 Discrete IN 2 Baseline Command 14 Node 2 3 DI3 Discrete IN 3 Baseline Command 14 Node 3 4 DI4 Discrete IN 4 Baseline Command 14 Node 4 5 DI5 Discrete IN 5 Baseline Command 14
PAGE 3
SureCross™ DX80K Wireless Configured Kit Specifications Many of the DX80 parameters are configurable. The values in the tables represent factory defaults unless otherwise noted. General * Power* Gateway: +10 to 30V dc (For European applications: +10 to 24V dc, ± 10%) Node: Internal battery Power Consumption Less than 1.4 W (60 mA) at 24V dc Mounting #10 or M5 (M5 hardware included) M5 fasteners – Max. Tightening Torque 0.56 N•m (5 in•lbf) Case Material Polycarbonate Weight 0.26 kg (0.57 lb.
PAGE 4
SureCross™ DX80K Wireless Configured Kit Specifications, continued Environmental * ** Environmental Rating* IEC IP67; NEMA 6 Operating Temperature** -40 to +85° C (Electronics); -20 to +80° C (LCD) Operating Humidity 95% max. relative (non-condensing) Radiated Immunity 10 V/m, 80-2700 MHz (EN61000-6-2) Shock and Vibration IEC 68-2-6 and IEC 68-2-7 Shock: 30g, 11 millisecond half sine wave, 18 shocks Vibration: 0.