Instruction Manual

Printed in USA 08/09 P/N 129322 rev. E
SureCross™ DX80K Wireless Configured
FlexPower™ Kit
I/O Repeater Kit with discrete inputs from Node (with switched power output) to
other Node
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products for personnel protection. Doing so could lead to serious injury or death.
These products do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
failure or malfunction can cause either an energized or de-energized output condition. Consult your current Banner Safety Products
catalog for safety products that meet OSHA, ANSI, and IEC standards for personnel protection.
Model Frequency Power I/O Mapping I/O Devices
DX80K9R3PE1 900 MHz ISM Band
10 to 30V dc (Gateway, Node)
3.6V dc Battery (FlexPower Node)
Gateway as I/O Repeater
(See hookup diagram)
Discrete
(Sinking)
1 Gateway, 2 Nodes
1 Battery Module
DX80K2R3PE1 2.4 GHz ISM Band
Models
Features
The SureCross™ DX80 is a radio frequency network system built around a Gateway and one
or more Nodes. Configured kits are packaged in a box with the preset Gateway, Node(s),
accessories, and hardware to get up and running quickly. In this configured kit, the Gateway
functions as the I/O repeater.
Kit contains a 10 to 30V dc Gateway, • FlexPower™ Node, 10 to 30V dc Node, and DX81
FlexPower supply module for powering one Node and switched power output of discrete
sensor
Input-to-output mapping connects the one Node’s discrete (sinking) inputs with the other •
Node’s two discrete (sinking) outputs
Node-to-Gateway-to-Node configuration extends the range of the wireless network•
Proprietary radio optimized for effective power management•
Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple •
Access (TDMA) control architecture combine to ensure reliable data delivery within the
unlicensed Industrial, Scientific, and Medical (ISM) bands
Transceivers provide two-way communication between the Gateway and Node, including •
fully acknowledged data transmission
Site Survey analyzes the network’s signal strength and reliability•
Lost RF links are detected and relevant outputs set to predefined conditions•
For additional information and a complete list of accessories, including FCC approved
antennas, please refer to Banner Engineering’s website, www.bannerengineering.com/
surecross.

Summary of content (8 pages)