Manual

43
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
SureCross Wireless Network
Product Manual
System Layouts
Stand-Alone Systems
Mapped Pairs (DX70)
In this system, a DX70 pair is used to map I/O in a simple one-to-one configuration: inputs on one DX70 are mapped to the outputs of the other
DX70. DX70 kits are configured at the factory and require no additional set up by the user.
Item Model No. Description
1
DX70G... DX70 Gateway
2
DX70N... DX70 Node
1
2
Gateway with Multiple Nodes (DX80)
In this configuration, the Gateway is the master of the wireless network. This network may be configured using the User Configuration Tool
(UCT) and RS-485 to USB adapter cable. The UCT is used to map inputs and outputs between Nodes and Gateways.
Item Model No. Description
1
DX80G... DX80 Gateway
2
DX80N... DX80 Node
3
81398 User Configuration Tool (software included on SureCross documentation CD, not shown)
4
BWA-HW-006 RS-485 to USB adapter cable (not shown)
1
2