Manual

8
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
SureCross Wireless Network
Product Manual
Introduction
DX83 Ethernet Bridge
1. Industrial Ethernet Port, female
2. Housing The rugged, industrial DX80 housing meets IEC
IP67 standards.
3. Mounting Hole, #10/M5
Clearance
Mounting Holes accept metric M5 or UNC/UNF
#10 hardware -- DIN rail mount adapter bracket
available.
4. 5-Pin M12 Euro-style quick-disconnect serial port
1
2
3
4
DX80 Gateway and Node Wiring Chamber
1. Housing The rugged, industrial DX80 housing meets IEC IP67 standards.
2. Mounting Hole, #10/M5 Clearance Mounting Holes accept metric M5 or UNC/UNF #10 hardware -- DIN rail mount adapter bracket
available.
3. Wiring Terminal Strip The 16 spring-clip type wiring terminals accept wire sizes: AWG 12-28 or 2.5 mm2
4. Port, PG-7 Gland or Blank The PG-7 threaded ports can accept provided cable glands or blanks.
5. Ribbon Connector Ribbon cable connects wiring base to LCD/radio.
The GatewayPro has no serviceable parts
inside the housing and no wiring chamber.
During setup or standard operation,
there should not be a need to open the
GatewayPro.
1
2
3
4
5