User guide
Printed in USA 08/09 P/N 129320 rev. D
SureCross™ DX80K Wireless Configured
FlexPower™ Kit
Discrete and analog inputs from a Gateway to 1 Node with switched power
output
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products for personnel protection. Doing so could lead to serious injury or death.
These products do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
failure or malfunction can cause either an energized or de-energized output condition. Consult your current Banner Safety Products
catalog for safety products that meet OSHA, ANSI, and IEC standards for personnel protection.
Model Frequency Power I/O Mapping I/O Devices
DX80K9M3GE1 900 MHz ISM Band
+10 to 30V dc (Gateway)
3.6V dc Battery (Node)
Configured
(See hookup
diagram)
Discrete In (Sinking)
Discrete Out (Sourcing)
Analog
1 Gateway, 1 Node, 1
DX81 Battery Module
DX80K2M3GE1 2.4 GHz ISM Band
Models
Features
The SureCross™ DX80 is a radio frequency network system built around a Gateway and one
or more Nodes. Configured kits are packaged in a box with the preset Gateway, Node(s),
accessories, and hardware to get up and running quickly.
Kit contains 10 to 30V dc powered Gateway, • FlexPower™ Node, and DX81 FlexPower
supply module for powering Node and switched power output of sensor
Gateway input-to-output mapping connects the Node’s two discrete (sinking) inputs and •
two analog (0–20 mA) inputs with the Gateway’s two discrete (sourcing) outputs and two
analog (0–20 mA) outputs
Proprietary radio optimized for effective power management•
Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple •
Access (TDMA) control architecture combine to ensure reliable data delivery within the
unlicensed Industrial, Scientific, and Medical (ISM) bands
Transceivers provide two-way communication between the Gateway and Node, including •
fully acknowledged data transmission
Site Survey analyzes the network’s signal strength and reliability•
Lost RF links are detected and relevant outputs set to predefined conditions•
For additional information and a complete list of accessories, including FCC approved
antennas, please refer to Banner Engineering’s website, www.bannerengineering.com/
surecross.