Owner's manual

T18XDN Series
P/N 47797 rev. C 5
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
Jam Nut
(Supplied)
11.5 mm
(0.45")
M18 x 1
Thread
ø 15 mm
(0.59")
30.0 mm
(1.18")
56.6 mm
(2.23")
ø 30.0 mm
(1.18")
Green LED
Power Indicator
Dimensions
Jam Nut
(Supplied)
Single Turn
Sensitivity Control
(D & L Models)
11.5 mm
(0.45")
M18 x 1
Thread
ø 15 mm
(0.59")
30.0 mm
(1.18")
66.5 mm
(2.62")
ø 40.0 mm
(1.57")
Red/Green LED
Network Status Indicator
Yellow LED
Output Indicator
T18XDN (All models except emitter)
T18XDN Emitter
The T18XDN Series sensor requires DeviceNet-compatible quick-disconnect cable, which is available from various manufacturers,
such as interlinkBT.
Hookups
V–
Shield
(if used)
V+Can_H
Can_L
V–
Shield
(if used)
V+Not Used
Not Used
Emitter Quick Disconnect Pin Detail
connector on sensor shown (male pins)
Quick Disconnect Pin Detail (Except Emitter)
connector on sensor shown (male pins)