Owner's manual

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]
T18XDN Series
P/N 47797 rev. C
Mounting Brackets
SMB18A
• For use with M18, S18, S186ELD, T18 and Q25
Series sensors
• 12-gauge, stainless steel, right angle mounting
bracket with a curved mounting slot for versatility
and orientation
• Clearance for M4 (#8) hardware
SMB18C
• For use with S18, M18, T18 and Q25 Series
sensors
• 18 mm split clamp bracket
• Black thermoplastic polyester
• Includes stainless steel mounting hardware
SMB18S
• 18 mm swivel bracket
• black thermoplastic polyester
• Includes stainless steel mounting hardware
46.0 mm
(1.81")
44.5 mm
(1.75")
36.0 mm
(1.42")
2.5 mm
(0.10")
25.4 mm
(1.00")
13.0 mm
(0.50")
Nut Plate
Spacer
(If Required)
M5 x 0.8
x 60 mm
Screw (2)
6.4 mm
(0.25")
10.9 mm
(0.43")
18.5 mm
(0.73")
25.4 mm
(1.0")
41 mm
(1.6")
46 mm
(1.8")
30°
30 mm
(1.2")
R 24.2 mm
(0.95")
ø 4.6 mm*
(0.18")
4.6 mm*
(0.18")
* Use 4 mm (#8) screws
to mount bracket.
Drill screw holes
24.2 mm (0.95") apart.
7.6 mm
40.0 mm
(1.60")
42.4 mm
(1.67")
30.0 mm
(1.18")
2.5 mm
(0.10")
21.1 mm
(0.83")
Nut Plate
M5 x 0.8
x 60 mm
Screw (2)
13 mm
(0.5")
14.0 mm
(0.55")
WARRANTY: Banner Engineering Corp. warrants its
products to be free from defects for one year. Banner
Engineering Corp. will repair or replace, free of charge, any
product of its manufacture found to be defective at the time it
is returned to the factory during the warranty period. This
warranty does not cover damage or liability for the improper
application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.