Product Manual

ManualsBrandsBannon ManualsHoists, Lifts + CranesHigh-Performance Aluminum Alloy Mini Lever Chain Hoist — 1650-Lb. Capacity, 5ft. Lift

Page 4 of 12

Intended Use

The Bannon Mini Lever Hoist is an easily-operated, portable lifting device. It’s suitable for loading and

unloading goods in garages, workshops, and warehouses. It is advantageous for lifting work in open

air grounds and places where there is not a power supply available. The hoist can be attached to a

trolley as a travelling chain hoist.

Technical Specifications

Model

#57098

#57099

#57103

Rated Capacity (lb.)

550

1100

1650

Lift Height (ft.)

Head Room (in.)

7-7/8

9-7/8

10-1/4

Load Chain Dia. (mm)

3.2

4.3

Important Safety Information

⚠WARNING

 Read and understand all instructions. Failure to follow all instructions may result in serious injury

or property damage.

 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or

situations that could occur. Exercise common sense and caution when using this tool. Always be

aware of the environment and ensure that the tool is used in a safe and responsible manner.

 Do not allow persons to operate or assemble the product until they have read this manual and

have developed a thorough understanding of how it works.

 Do not modify this product in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the product. There are specific applications for which the product

was designed.

 Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger

industrial equipment. There are certain applications for which this equipment was designed. This

product will be safer and do a better job at the capacity for which it was intended. DO NOT use

this equipment for a purpose for which it was not intended.

 Industrial or commercial applications must follow OSHA requirements.

⚠WARNING

WORK AREA SAFETY

 Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.

Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas

may put you dangerously close to cutting tools and rotating parts.

 Do not use the hoist where there is a risk of causing a fire or an explosion; e.g., in the presence of

flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable

liquids, gases, or dust.

 Do not allow the hoist to come into contact with an electrical source. The tool is not insulated and