07 5. 6.
08 7. 8 8. 7 9.
09 9
10 11 Remote control wiring diagram 10
12 Turn on the fan and check the condition of the fan operation. And make sure that you can control the fan speed and light properly by the remote control . The appropriate speed settings for warm or cool weather depends on factors such as the room size, ceiling height and number of fans. The slide switch controls the direction of the blades: forward (switch down) or reverse (switch up). NOTE: Before reversing the direction of the blade rotation, please wait until the fan stops. A.
13 Slide the balancing clip on the trailing edge of any blade, halfway between the holder and tip. Run the fan to check the wobble. If the wobble persists, repeat with each blade, noting which one most reduced the wobble. Slide the clip in small increments away from the center of that blade. Move the clip, operate the fan, then move it again until you eliminate as much wobble as possible. Stick the adhesive-backed balancing weight on the top center of the blade directly in line with the balancing clip.
14 □ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish.