BF-H6 User Manual To users Thank you for your favor with our products. This product is a high-power radio, If you are long time transmit will cause the heat of this machine is a normal phenomenon, In the case of sufficient distance recommended to use Middle (Middle power) or Low (Low power) to transmit! Thanks for using! LCD 大屏幕显示 LCD Screen 高中低三档功率可选 DTMF 编码 High/Medium/Low Power are optional DTMF Encoded U/V 全段接收 UHF/VHF Full frequency receive 128 组存储信道 Up to 128 memory channels.
熟悉本机 Familiar with this Product ■熟悉本机（插图说明） Antenna A helical antenna for receiving and transmitting signals. Battery Push-button This is for fixing the battery Battery Pack This is to power the radio Speaker This is for the radio output voice Microphone This is putting voice into the radio External interface Strap buckle 【Power/Volume】Knob This is for external earphones; Or external write frequency line, can use PC write frequency software to write frequency operation and program upgrade.
In channel mode, switch channels up and down; In Menu status, change to set the menu items and menu values, press more than 2 seconds to quickly forward or backward search. In scanning status, Change the scanning direction. [Exit] and A/B switch button In the input status, clear the input information; In standby mode, press this button to switch A/B, Switch 65-75/76-108mhz frequency in the FM mode.
2、Standby for channel mode 功能键盘 Function of the keyboard Menu select/confirm key: [MENU] Use this key to activate menu mode and select items in the menu mode.
This is for external earphones; Or external write frequency line, can use PC write frequency software to write frequency operation and program upgrade. DTMF After the DTMF is turned on, press the PTT + Side 2 will send out TONE. 点阵屏界面显示 LCD Icons The LCD screen is used to display all the working status of the two-way radio. The corresponding function icons are displayed on the screen during operation. The screen allows you to know the meaning of the icons and how to set the functions more quickly.
Arabic 15 numerals ■用前准备 In channel mode, the current channel number for B Preparation before use 充电 Charging Note: Be sure to ensure that the product is off when charging.
●Battery safety attention 1. Do not allow metal contacts (including coins, keys, jewelry, or other conductive metal) to be touched by the battery contacts or pole pieces. Otherwise, the battery may short circuit, discharge, heat or leak, which may result in damage to the item or personal injury. Therefore, be careful when handling any battery. 2. Do not short-circuit the battery terminals or discard the battery in a fire. Do not disassemble the battery pack.
电池电压、电量指示 Battery Voltage & Power Indication Long press the 【0】 key for display battery voltage, The top right of the screen shows the current battery power icon is as follows: Icon Battery power High Medium Low Insufficient ■基本操作 Basic Operation 开机与关机 Power on/off To turn on the power, turn the【Power Switch / Volume Control】 knob clockwise until you hear a "click" sound and a short beep sounds. To turn off the radio, turn the knob counterclockwise until you hear a click.
Menu list No Level 1 menu English 0 1 Squelch Step 中文 Description of settings Level 2 menu English 中文 静噪等级 0,…,9 Squelch level, the lower the level is easy to interfere; the higher the level of sensitivity is worse, it is best to set the middle. 步进频率 2.5KHz 5.0KHz 6.25KHz 10.00KHz 12.50KHz 20.0KHz 25.0KHz 50.0KHz In frequency mode, when the UP and DOWN keys are pressed, the step value of frequency is changed.
Prompt 9 Tx over time ON Turn on beep prompt OFF Press and hold the PTT key to keep transmits. OFF The number goes from 15 to 600. In 15 steps, Indicates the maximum transmit time by pressing the PTT key DCS is not set Standard sequence of DCS. CTCSS is not set Standard sequence of CTCSS. In Menu Mode, It can be typed directly from the keyboard (standard or non-standard). DCS is not set Standard sequence of DCS CTCSS is not set Standard sequence of CTCSS.
19 MDF-A EOT 松开发码 BOTH 同时发码 Frequency 信道频率 Name 信道名称 A 段显示 方式 Frequency 20 MDF-B B 段显示 方式 Name OFF 21 22 23 Busy Lockout 遇忙禁发 Key Auto Lock 自动键盘 锁 Direction ON 频差方向 OFF ON None 无 Plus 正向 Minus 反向 Release PTT to send code Send code when it is pressed or released the PTT. In channel mode, the A channel is display channel frequency. In channel mode, the A channel is display channel name.
24 Offset 频差频率 00.000,…,99.998 25 Memory 信道存储 000,…,127 26 Delete 信道删除 000,…,127 In frequency mode, the difference between the transmitted and received frequencies. When save a channel, indicates the channel number to be saved. If a number is preceded by “CH-”, the channel already has channel parameters. Deletes channel parameters for the specified channel, If no “CH-”indicates that the channel has no parameters, the operation is invalid.
OFF 32 RPT-RL 关闭 过中继尾 音检测 1s,2s,3s… 10s 33 PROGER 34 R-TONE 35 Power On Msg 发射结束 提示音 TONE 音 OFF 关闭 ON 开启 1000hz,1450hz,1750hz,2100hz Preset Logo 预设图标 Preset Msg 预设信息 开机显示 releases the PTT key, the radio enters receiving status. Due to the delay of repeater, the instant signal transmitted by the repeater can be received.
36 37 ◆发射DTMF Language Reset 语言选择 Voltage 电池电压 中文 English VFO 中文 English 频率模式 恢复出厂 设置 ALL 全部 Initialize of Menu Initialize of Menu and channel Transmit DTMF Press and hold the 【PTT】 key and press the corresponding number key to launch the corresponding DTMF number ◆声控发射（VOX） After activating this function, if the volume level of speech reaches the level selected by the radio, do not press the [PTT] button, the radio can also be automatically transmit.
2）Press【▲】/【▼】to select “Dual Standby”, Or enter the number 7 directly into the menu item. 3) Press【MENU】to select, then Press【▲】/【▼】to select “ON”. 4) Press【MENU】the radio voice prompts “confirm” to Save and return to the previous menu. • Repeat the above operation, select OFF and turn OFF the Dual Standby function. • In dual standby mode, the radio is in the scanning status of main and secondary channels.
4. Power Settings：Press the [MENU] → Keyboard [2] → [MENU] →【▲】or【▼】 to select ‘HIGH’→ [MENU]， 5. Bandwidth：Press the Keyboard [5] → [MENU] →【▲】or【▼】to select ‘NAWR’→ [MENU]， 6. Rx DCS：Press the Keyboard [1] and [0] → [MENU] →【▲】or【▼】to select ‘D031N’→ [MENU]， ·Setting the receive CDCSS, and automatically turn off the receive CTCSS; similarly, setting the receive CTCSS will automatically turn off receive CDCSS.
7）Press the [MENU] → Keyboard [2] and [5], the screen display , 8）press the【MENU】,then the radio voice prompts “Memory Channel”, the screen display , 9）Press the 【MENU】,then the radio voice prompts “transmit Memory”, the screen display ; 10）Press [BACK] to frequency mode.
127.3，131.8，136.5，141.3，146.2，151.4，156.7，159.8，162.2，165.5，167.9，171.3，173.8，177.3，179.9，183.5，186.2， 189.9，192.8，196.6，199.5，203.5，206.5，210.7，218.1，225.7，229.1，233.6，241.8，250.3，254.
does not work in the frequency/channel/color digital channel time slot Other sound in the Interference from the code/ code/ time slot same Change to new frequency, or correct the channel, which is not frequency squelch from the members The signal is not set yet. Set the signal for all radio in the group Be too away from other members. Get close with other members. Poor location, such as blocked by Move to open environment, restart the tall buildings, or located in the radio.
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Signal-to-noise ≥-40dB QT/DQT Deviation 0.4±0.1KHz Modulation Sensitivity 8-12mV All specifications may be modified without prior notice or liability.
