User Manual

35 36
Description of settings
Scan main channel and sub-channel in turn; call is locked when the
reception is effective; you can press PTT to talk with the other party
Turn off encryption
Turn on encryption function, and the two sides must pair the key to
make the call normally
Turn off power saving mode
Turn on the power saving mode; power saving ratio is 1:4
Options: Off/On. Turn off all tones when Off is selected, but do not
include emergency alarm tone
Options: Off / Digital / Analog. Pressing the PTT button will transmit the
signal through the channel and will sound a tone that prompts the user
to start speaking.
● OFF: Turn off this function
● Digital: Enable this tone only for digital channels
● Analog: Enable this tone only for analog channels
● Both：Enable this tone for digital channels and analog channels
Options: Off/On. There is no prompt tone when Off is selected
The background light is on all the time
The background light off all the time
Turn off the backlight automatically when the time is up
Press and hold # to lock, press the MENU and * to unlock
Auto lock; lock automatically at set time; press the MENU and # to
unlock
The indicator (transmission, receiving, boot, etc.) does not work when
it is off
Default option is on
Level 2 menu
Encrypt
Power Save
Beep
Backlight
Keypad Lock
Indicator
Single Wait
Off
On
Off
On
All Tone
Call Permit
Key Beep
Always On
Always Off
5/10 sec
Manual
5/10/15 sec
Off
On
Level 1 menu Level 3 menu Options
Set Radio Set
Options
can be
config-
ured
Options
can be
config-
ured
Options
can be
config-
ured
Options can
be
configured;
for digital
mode only
Options
can be
config-
ured
Remark