User's Manual

To stop the NOAA weather scans and set the channel manually on the NOAA weather band, press the key during
NOAA weather scan. The radio will stop scanning and the display will show the current WX Band channel setting.
To turn the NOAA weather receiver off, press the / key.
Note: NOAA weather radio stations are assigned to cover specific areas and service may be limited. Please check with your
local weather office for frequency and details or visit www.weather.gov/nwr in the US to view the appropriate transmitter for
your area. When you listen to a weather channel, you cannot use your radio in scan mode or for GMRS communications.
7. WORKING THE MENU SYSTEM
For a complete reference on available menu items and parameters, see Appendix C, Shortcut Menu operations.
Note: in channel mode, the setting of these features is not possible: CTCSS/ DCS tones, wide/narrow bandwidth, PTT-ID,
Busy channel lock out, channel name edit.
7.1 Basic use
Using the menu with arrow keys
A. Press the key to enter the menu.
B. Use the / keys to navigate between menu items.
C. Once you find the desired menu item, press again to select that menu item.
D. Use the / keys to select the desired parameter.
E. When you've selected the parameter you want to set for a given menu item;
a). To confirm your selection, press and it will save your setting and bring you back to the main menu.
b). To cancel your changes, press [ ] and it will reset that menu item and bring you out of the menu entirely.
F. To exit out of the menu at any time, press the [ ] key.
7.2 Using short-cuts
As you may have noticed if you looked at Appendix C, Shortcut Menu operations, every menu item has a numerical value
associated with it. These numbers can be used for direct access of any given menu item.
The parameters also have a number associated with them; see Appendix C, Shortcut Menu operations for details.