User's Manual

(20) SCAN Resume Mode (Scan Mode) - MENU No.19
Thanks to this function, GM-15PRO can SCAN in frequency or channel mode. You can choose amongst three options:
• Time-operated SCAN
Whenever a signal is detected, the radio will suspend the SCAN for 5 seconds, and then will continue to SCAN even if the
signal is still present.
• Carrier-operated SCAN
Whenever a signal is detected, the radio will stop scanning. It will resume to SCAN once the signal will disappear.
• Search -Search SCAN
The radio will stop scanning once a signal is detected.
(21) PTT-ID (PTT-ID) - MENU No.20
With this function you can decide when sending the ANI-ID code in tx mode.
You can choose amongst 4 possibilities.
• Off: press PTT to turn it off
• BOT: the code is sent when you press the PTT
• EOT: the code is sent when the PTT is released
• BOTH: the code is sent when you press and release the PTT
Note: select ‘OFF’ when using in case of affecting the radio.
(22) Channel A Display Mode (MDF-A) - MENU No.21
This function is used to set the display mode of channel A.
Display modes:
• Frequency: Frequency + channel No.
• Name: Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(23) Channel B Display Mode (MDF-B) - MENU No.22