User's Manual

17
Scan Add-Scan
channel add
MENU+17
ON: the current channel is added to the scan, the
scan current channel
OFF: Do not scan the current channel.
18
Scan Ran- Scan
Frequency Range
MENU+18
136-174 & 400-520MHz
*Ex. 144 148 input and scan range is
144.0000-148.0000
* Scanning frequency range, valid in VFO mode.
The channel mode, invalid input, cannot be saved
19
Scan Mode -
Scanner Resume
Method
MENU+19
Time - scanning will resume after a fixed time has
passed
Carrier -scanning will resume after the signal
disappears
Search -scanning will not resume
20
PTT-ID - PTT-ID
MENU+20
Off: No ID is sent
BOT: The selected S-CODE is sent at the beginning
EOT: The selected S-CODE is sent at the ending
BOTH : The selected S-CODE is sent at the beginning
and ending
21
MDF-A - Channel A
Display Mode
MENU+21
Frequency: Displays programmed Frequency
Name: Displays the channel name
*Note: Names must be entered using software.
22
MDF-B - Channel B
Display Mode
MENU+22
Frequency: Displays programmed Frequency
Name: Displays the channel name
*Note: Names must be entered using software.
23
Busy Lock – Busy
Channel Lock-out
MENU+23
Off
On
*Disables the [PTT] button on a channel that is
already in use. The transceiver will sound a beep
tone and will not transmit if the [PTT] button is
pressed when a channel is already in use.