User's Manual

24
AUTO LK
–Automatic
Keypad Lock
MENU+24
Off
On
*When ON, the keypad will be locked if not used in
8 seconds. Pressing the [* ] key for 2 seconds will
unlock the keypad.
25
Direction –
Frequency Offset
Direction
MENU+25
None: TX = RX (simplex)
Plus: TX will be shifted higher in frequency than RX
Minus : TX will be shifted lower in frequency than RX
26
Offset -Frequency
shift
amount
MENU+26
00.000…99.998
*Specifies the difference between the TX and RX
frequencies
27
Memory - Store a
Memory Channel
MENU+27
000…250
*This menu is used to either create new or modify
existing channels (0 through 250) so that they can
be accessed from
MR/Channel Mode
28
Delete - Delete a
memory channel
MENU+28
000…250
*This menu is used to delete the programmed
information from the specified channel (0 through
250) so that it can either be programmed again or
be left empty.
29
Alarm Mode -
Alarm Mode
MENU+29
Site: Sounds alarm through your radio speaker only
Tone: Sending alarm tone
Code: Sending alarm code
30
SEEK CTC -Scan of
frequencies with
CTCSS
MENU+30
67.0HZ,…,254.1HZ
*Automatic stop after receiving the CTCSS signal