Safety Information

29
Alarm Mode -
Alarm Mode
MENU+29
Site: Sounds alarm through your radio speaker only
Tone: Sending alarm tone
Code: Sending alarm code
30
SEEK CTC -Scan of
frequencies with
CTCSS
MENU+30
67.0HZ,…,254.1HZ
*Automatic stop after receiving the CTCSS signal
31
SEEK DCS -Scan of
frequencies with
DCS
MENU+31
D023N,…,D754I
*Automatic stop after receiving the DCS signal
32
TAIL - Squelch Tail
Elimination
MENU+32
On
Off
*This function is used eliminate squelch tail noise
between POFUNG handhelds that are
communicating directly (no repeater). Reception of
a 55 Hz or 134.4 Hz tone burst mutes the audio long
enough to prevent hearing any squelch tail noise.
33
RP-STE-Squelch
Tail Elimination
MENU+33
Off/ 1,2,3…10
*This function is used eliminate squelch tail noise
when communicating through a repeater.
34
RPT-RL - Delay the
squelch tail of
repeater
MENU+34
Off/ 1,2,3…10
*Delay the Tail Tone of Repeater (X100 milliseconds)
35
ROGER - Roger
Beep
MENU+35
Off
On
*Sends an end-of-transmission tone to indicate to
other stations that the transmission has ended.