Owner's Manual

Installation of Accessories
Install the Li-ion Battery
To install the batteries:
(1) Turn off the radio. Orient the back of the radio and the battery latch toward you.
(2) Fit the battery to the back of the radio (cover the product nameplate). Squeeze and push the battery pack toward the top
until the battery is locked by the latch.
Remove the battery
(1) Turn off the radio. Orient the back of the radio and the battery latch toward you. .
(2) Press down on the battery latch to the end, and pull out the battery towards you until it is completely detached from the
radio.
Installing the Belt
To install the Belt Clip, slide the clip down into the slot on the back of the radio until the Belt Clip-latch clicks. To remove the
Belt Clip, press the Lock-tab down, and then gently pull the belt clip up toward the top of the radio.
External Speaker/Microphone Jack
Each radio can be used with an optional external speaker/microphone or headset, freeing your hands for other tasks. To use
an optional speaker / microphone or headset:
(1) Open the rubber cap on the side of the radio.
(2) Insert the plug(s) into the SPK/MIC jacks.
(3) Place the ear bud into your ear, and adjust the Microphone into your desired position.
Using a Headset
You can use a headset (#480_5R) for more private communications. To use a headset, lift the rubber cover from over the
headset jack, and then plug in the headset.