Owner's Manual

Important: Your radio is not submersible or waterproof when using a headset jack. When you remove the headset, be sure

to fully press the jack cover into place to restore its waterproof capability.

Charging the Battery

Charging the Radio

The radios can be charged directly by using the supplied charging cradle. A single radio can charge using the Micro USB port

to connect to a USB power source. For fastest charging, turn off the radio before charging.

Warning!

To avoid the risk of personal injury or property damage from fire or electrical shock, only use the accessories specifically

designated for this product. Using the Micro USB Port

(1) Connect the included AC adapter with Micro USB connector cable to the radio's Micro USB port. Connect the other end

to an outlet that provides USB charging power (NOT to a USB hub).

(2) Charge the batteries for 6 hours until the battery indicator either stops flashing.

Using the Charging Cradle

(1) Connect the included AC adapter with USB connector cable to the charging cradle's Micro USB port. Connect the other

end to a standard AC wall outlet.

(2) Set the charging cradle on the desk or tabletop, and place the radio in the charging cradle with the keypad facing forward.

(3) Charge the batteries for 6 hours.

Note:

• Use only the supplied batteries, charger, and AC adapter or approved accessories.

• Charge time may vary depending on the battery life remaining.

• The batteries must be installed for the unit to operate, even if the unit is also connected to external power.

• If battery power is low, you cannot operate the radio even using external power. Allow the batteries to charge before

using.

*If you try to transmit while power is low, the radio will automatically turn off.